Milwaukee CLL-C Green Cross Line Laser 30mtr Range
Milwaukee CLL-C Green Cross Line Laser
CLL-C Green Cross Line Laser powered by 4 x AA Alkaline batteries, provides an all-in-one functionality with horizontal levelling and vertical alignment using high intensity green beams providing a working range of 30mtr and up to 50mtr with a detector (not supplied). The CLL-C Cross Line Laser uses a 3 mode pendulum system, Manual Mode for use at any angle, Self-Levelling Mode that indicates out-of-level condition with a 4 degree self-levelling range and Pendulum Lock Mode to protect components during transportation to and from site or between measurements.
Other features include an integrated magnetic bracket with rear mounted amplified rare earth magnets, 1/4″ tripod thread and hang hole allowing the Milwaukee Laser to be attached to steel studding, wooden studding and a tripod, the bracket also provides the laser 360 degree rotation. Designed and manufactured with a tough over-moulded construction the laser has a IP54 rating, water and debris resistant withstanding up to 1mtr drops out on site
Technical Specification Milwaukee CLL-C Green Cross Line Laser
- High intensity green cross line laser
- 1x vertical green laser line, 1x horizontal green laser line
- Visible working range 30mtr
- Detector working range 50mtr (detectors LLD50 or LRD100 not supplied)
- Self levelling range 4 degrees
- Self levelling time 3 seconds
- Accuracy 0.3mm/mtr
- 3 mode pendulum
Manual mode for use at any angle
Self levelling mode indicates out-of-level condition
Pendulum lock mode protecting components during transit - Integrated magnetic brackets
- Rear mounted amplified rare earth magnets
- 1/4" tripod thread
- Hanging hole for attaching to studding
- Bracket allows 360 degree laser rotation
- Tough overmould protection IP54 rating
- Water and debris resistant withstanding 1mtr drops
- 4 x AA alkaline batteries provides over 8hrs runtime power
- Milwaukee kitbox
- Weight 0.7kgs
- All Milwaukee Laser Inspection Equipment from Power Tools UK comes with full industrial warranty
Technical Specification Milwaukee CLL-C Green Cross Line Laser
- High intensity green cross line laser
- 1x vertical green laser line, 1x horizontal green laser line
- Visible working range 30mtr
- Detector working range 50mtr (detectors LLD50 or LRD100 not supplied)
- Self levelling range 4 degrees
- Self levelling time 3 seconds
- Accuracy 0.3mm/mtr
- 3 mode pendulum
Manual mode for use at any angle
Self levelling mode indicates out-of-level condition
Pendulum lock mode protecting components during transit - Integrated magnetic brackets
- Rear mounted amplified rare earth magnets
- 1/4" tripod thread
- Hanging hole for attaching to studding
- Bracket allows 360 degree laser rotation
- Tough overmould protection IP54 rating
- Water and debris resistant withstanding 1mtr drops
- 4 x AA alkaline batteries provides over 8hrs runtime power
- Milwaukee kitbox
- Weight 0.7kgs
- All Milwaukee Laser Inspection Equipment from Power Tools UK comes with full industrial warranty
Review Average | 0 |
---|---|
Review Star Width | 0 |
Review Count | 0 |
Review Data Last Updated | 1713443550 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.