Milwaukee M12BST-0 Stapler 12v BODY ONLY
Milwaukee M12BST-0 Stapler
12v BODY ONLY M12BST-0 Milwaukee Stapler breakthrough performance limits trade fatigue by eliminating the repetitive motion of hand tools with ready to fire technology eliminating ramp-up time between each staple discharge. Superb features of this M12BST-0 Milwaukee Stapler offers bump fire and sequential fire operation allowing the tradesman to fire quickly and accurately with around 2000 staples fired with one 12v x 2Ah battery pack.
This 12v Milwaukee Stapler fires standard T50 staples from 6mm to 14mm plus dry-fire lock out that stops this 12v Stapler from being fired when empty
Specification of 12v M12BST-0 Compact Stapler
- 12v BODY ONLY power tool
- Cycle rate of 140
- magazine capacity is 89
- Staple strip T50
- Staple capacity 6/14
- Staple strip length 6mm to 14mm
- Staple strip width 11.4mm
- Ready to fire technology
- Bump fire and sequential firing operation
- 2000 staples fired from a single 2Ah charge
- Fires standard T50 staples from 6mm to 14mm
- Dry fire lock out
- Adjustable belt hook
- Compact length height and width
- Flexible battery system works with all Milwaukee M12 batteries
- Weight 1.2kgs
- All Milwaukee Power Tools from Power Tools UK come with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1713424612 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.