Milwaukee HL-SF Spot Flood Headlamp 450 Lumens
Milwaukee HL-SF Spot Flood Headlamp
HL-SF Milwaukee Spot Flood Headlamp gives the trade up to 450 lumens of TRUEVIEW high definition light plus 100mtr spot beam distance and a wide flood beam allows direct pivoting light head using seven adjustable positions. The HL-SF Headlamp offers up to to 25 hours of run-time with five light output modes to optimise run-time, beam type, and brightness. Supplied with four universal hard hat clips for secure connection to all hardhats and a soft, sweat absorbing microfiber strap and forehead pad that provide the trade with all day comfort when worn on a bare head
Specification of Milwaukee HL-SF Spot Flood Headlamp
- 450 lumens of TRUEVIEW high definition light
- 100mtr spot beam distance plus wide flood beam
- 5 light output modes
- Maximum light output hybrid spot/flood 450 lumens, flood high 350 lumens, flood medium 150 lumens, flood low 25 lumens, spot high 350 lumens
- Maximum run-time hybrid spot/flood 2hrs, flood high 4hrs, flood medium 10hrs, flood low 26hrs, spot high 4hrs
- Direct pivoting head light with 7 positions
- Soft sweat absorbing microfibre strap and forehead pad
- All day comfort against the bare head
- Powered by 3 x AAA batteries (supplied)
- SKU number 4933471388
- Weight 0.15kgs
- All Milwaukee Headlamps from Power Tools UK come with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1713867605 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
