Milwaukee M18FHT45-0 Hedge Trimmer 18v BODY ONLY 450mm Blade
Milwaukee M18FHT45-0 Hedge Trimmer
18v BODY ONLY M18FHT45-0 Milwaukee Hedge Trimmer uses the 450mm blade for more flexibility and the power to cut 19mm branches, sustains power under load without bogging down and up to 2 hours run-time off an M18 HIGH OUTPUT 8Ah battery. The all-metal gear case fully encloses and completely protects the gear drive system from jobsite abuse plus the useful blade tip guard protects the blades and prevent accidental damage of fences or other objects, the rail handle placement and weight distribution provides the best combination of balance and control.
The HIGH OUTPUT system of Milwaukee Power Tools elevate the M18 FUEL technologies to a new level and deliver extended performance and run-time. This M18FHT45-0 Milwaukee Hedge Trimmer has been designed to maximise the partnership with HIGH OUTPUT Milwaukee batteries
Specification of 18v Milwaukee M18FHT45-0 Hedge Trimmer
- 18v BODY ONLY power tool
- 450mm blade length
- 19mm cutting capacity
- No load speed 3400mtr/min
- Stroke rate 3400spm
- 30 degree sharpening angle to horizontal
- Sustains power under load without bogging down
- All metal gear case
- Protection of gear drive system
- Blade tip guard
- Part number 4933479677
- Bail handle placement and weight distribution provides best balance
- Weight 4.8kgs
- All Milwaukee Power Tools from Power Tools UK come with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1714043406 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.