Milwaukee 4932479855 Shockwave Impact Driver Bit Set 54pce
Milwaukee 4932479855 Shockwave Impact Driver Bit Set
4932479855 Milwaukee Shockwave Impact Driver Bit Set specifically manufactured for use with Impact Drivers making these Milwaukee Accessories great for heavy duty impact applications around trade sites. The 4932479855 Impact Bit Set uses a combination of SHOCKZONE design and Milwaukee heat treatment allowing the bit to absorb impacts plus the SHOCKZONE geometry has been designed to flex under load reducing stress through the tip resulting in less bit breakage.
This superb Milwaukee Bit Set comes with a very hand carbineer and bespoke tough carry case allowing the trade to keep bits easy to select and close at hand
Specification of 54pce Milwaukee 4932479855 Shockwave Impact Screwdriver Bit Set
- Phillips bits 1 x 25mm Ph1, 6 x 25mm Ph2, 1 x 25mm Ph3 and 1 x 50mm Ph3
- Pozi bits 1 x 25mm Pz1, 6 x 25mm Pz2, 1 x 25mm Pz3 and 1 x 50mm Pz3
- Torx bits 2 x 25mm TX10, 2 x 25mm TX15, 3 x 25mm TX20, 6 x 25mm TX25, 2 x 25mm TX30, 1 x 50mm TX30 and 1 x 50mm TX40
- Hex bits 1 x 4mm Hex and 1 x 5mm Hex
- Slotted bits 1 x SL 0.6, 1 x SL 0.8, 1 x SL 1.2 1 x 60mm
- Shockwave Magnetic Bit Holder
- Carbineer: 2 x 50mm Ph2, 2 x 50mm Pz2, 1 x 50mm TX15, 1 x 50mm TX20, 2 x 50mm TX25, 1 x 50mm TX30, 1 x 50mm TX40
- Tough bespoke plastic carry case
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1713779215 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.