Milwaukee M18FHIWF12-0 Impact Wrench 18v BODY ONLY 1/2" Square Drive
Milwaukee M18FHIWF12-0 Impact Wrench
18v BODY ONLY M18FHIWF12-0 Milwaukee Impact Wrench this machine is part of the superior M18 FUEL range of Milwaukee Power Tools, high torque Impact Wrench complete with a friction ring delivering 1354Nm of fastening torque and 1897Nm of nut-busting torque. The BODY ONLY M18FHIWF12-0 Milwaukee Impact Wrench is one of the industry’s most compact cordless 18v High Torque Impact Wrench at just 213mm in length allowing safe access into tight work areas around the site or tough maintenance working conditions.
Milwaukee 4-Mode DRIVE CONTROL with Bolt Removal mode gives the trade more control when fastening up or down, the Bolt Removal mode gives superior control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. This M18FHIEF12-0 Impact Wrench includes a 1/2" Friction Ring Anvil allowing the tradesman to quickly and easily change sockets plus the premium rubber overmold gives ultimate comfort during prolonged use while lasting longer against corrosive materials
Specification of 18v Milwaukee M18FHIWF12-0 Impact Wrench
- 18v BODY ONLY power tool
- M18 FUEL Impact Wrench
- POWERSTATE brushless motor
- 4 mode drive control with bolt removal mode
- No load speeds 0 to 550rpm, 0 to 1400rpm, 0 to 1750rpm and 1750 to 750rpm
- No load impacts 0 to 950ipm, 0 to 1750ipm, 0 to 2100ipm
- Fastening torque 1354Nm
- Bolt removal mode maximum nut busting torque breaking fasteners free
- 1/2" square drive anvil with friction ring
- Bright LED job light
- Premium rubber overmould increases comfort and corrosion protection
- REDLINK PLUS advanced digital overload enhancing productivity, performance and protection under load
- REDLITHIUM batteries superior construction electronics and fade free performance
- Weight 1.9kgs
- All Milwaukee Power Tools from Power Tools UK come with full industrial warranty
| Review Average | 5.0000 |
|---|---|
| Review Star Width | 100 |
| Review Count | 1 |
| Review Data Last Updated | 1713416036 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
