Milwaukee M18BP-0 Planer 18v BODY ONLY
Milwaukee M18BP-0 Planer
18v BODY ONLY M18BP-0 Milwaukee Planer with a powerful 4 pole Milwaukee motor capable of delivering 14000rpm for optimum surface finishes, these BODY ONLY 18v Planers are capable of fast stock removal using two double edged carbide blades over the total planer width of 82mm. Quick and easy fully adjustable cut depths from 0 to 2mm plus 20 locking positions allowing the trade to accurately set the amount of material to be removed in one pass.
Other features of these M18BP-0 Planers include up to 10.7mm rebate depth, an extended front shoe allowing the machine to be placed on the work piece accurately and quickly plus a kick stand that is located on the base that protects the work piece from accidental damage
Specification of 18v Milwaukee M18BP-0 Planer
- 18v BODY ONLY power tool
- High performance 4 pole motor
- No load speed 14000rpm
- 2 double edged carbide blades
- 82mm planer width
- Adjustable depth 0 to 2mm
- Up to 10.7mm rebate depth
- Left and right chip ejection
- Extended front shoe
- Kick stand protects work piece
- REDLINK overload protection
- Constant speed electronics
- Weight 2.3kgs
- All Milwaukee Power Tools from Power Tools UK are supplied with full industrial warranties
| Review Average | 5.0000 |
|---|---|
| Review Star Width | 100 |
| Review Count | 1 |
| Review Data Last Updated | 1713141426 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
