Click Fraud
£5.75 + VAT delivery per order UK mainland and NI

Trend LOCK/JIG Lock Jig with Interchangeable Templates

Be the first to review this product

In stock
Please allow up to 3 working days to deliver
Product Code:
LOCK/JIG
£112.44 £93.70

View Product Information

Trend LOCK/JIG Lock Jig

LOCK/JIG Trend Lock Jig uses a set of easy change interchangeable templates that allows the router to cut mortise and face-plate recesses on popular door locks, the jig requires the router to be fitted with a 30mm guide bush and 12mm long reach cutter. For most common sash mortise and dead locks, with up to 2 1/2″ deep mortises and a 7/8″ or 1″ face-plate, deeper mortises can be achieved with a suitable size of auger bit, also suits face-plate on a 1″ mortise latch , fast, clean and accurate results even in hardwood and doors with knots

Can be used with locks having the following Face-Plate dimensions

Imperial Metric Template

  • 7/8″ x 6 1/8″ 22.2 x 156mm 1
  • 7/8″ x 6″ 22.5 x 152.5mm 2
  • 1″ x 4 3/4″ 25.4 x 121mm 3
  • 1″ x 5″ 25.4 x 127.5mm 4
  • 1″ x 5 1/4″ 25.4 x 133.5mm 5
  • 1″ x 5 3/4″ 25.4 x 145mm 6
  • 1″ x 6″ 25.4 x 153mm 7
  • 1″ x 6 1/8″ 25.4 x 156mm 8
  • 1″ x 6 1/2″ 25.4 x 165.5mm 9
  • 1″ x 7″ 25.4 x 177mm 10
  • 1″ x 2 1/4″ 25 x 57.5mm 11 UPPER
  • 1″ x 2 1/4″ 25.6 x 56.5mm 11 LOWER
  • 1″ x 6 3/8″ 25.6 x 162 12

Mortise dimensions:

These are maximum mortise lengths, unless radius ends are squared with a Corner Chisel, however smaller mortise locks can be accommodated depending on position of their fixing screws

  • Imperial Metric Template
  • 5/8″ x 2 7/8″ 16 x 72mm A
  • 5/8″ x 4 1/4″ 16 x 107mm B
  • 3/4″ x 3 1/8″ 19 x 78mm C
  • 3/4″ x 4 1/4″ 19 x 109mm D

A template for both the mortise and the face-plate is selected to suit the size of the lock. See chart above for suitable lock sizes

Templates are simply placed in the jig aperture and are held by two powerful magnets, the Lock Jig must be used with a 30mm guide bush and 12mm diameter cutter, if deep mortises are to be cut then a heavy duty router, such as the T9 should be used with a long reach cutter such as the TR37x1/2TC, if a medium duty router is to be used such as the T5, then full mortises are not possible and a suitable size auger bit fitted in a drill will be required to deepen the mortise

If the Lock Jig is to be used in conjunction with the Trend Hinge Jig, then the guide bush collar (included) should be used to bush out the 16mm guide bush to 30mm, thus making it unnecessary to change guide bushes between the Hinge and Lock routing operations

Mark the appropriate position for the lock and centralize on the door using the centre line notches within the jig aperture. The jig can then be clamped to the door, in most applications, the door will be held secured on its side, but the jig can be used with the door hung in the frame, if it is wedged in a fixed position, a measurement from the top of the door to the top of the jig can be used for further doors

More Information
Review Average 0
Review Star Width 0
Review Count 0
Review Data Last Updated 1711582941

Reviews