Click Fraud
£5.75 + VAT delivery per order UK mainland and NI

Milwaukee M18FTR-0X Router 18v BODY ONLY FUEL

Be the first to review this product

In stock
Please allow up to 3 working days to deliver
Product Code:
M18FTR-0X
£303.60 £253.00

View Product Information

Milwaukee M18FTR-0X Router

18v BODY ONLY M18FTR-0X Milwaukee Router FUEL gives the trade all day run-time off a single charge of an M18 x 5Ah battery (NOT SUPPLIED) up to 115mtr of cutting powered through a POWERSTATE brushless motor delivering the power of AC trim routers up to a maximum 31000rpm for powerful, smooth accurate cutting. Main features of this superb cordless M18FTR-0X Milwaukee Router include a variable speed dial allowing users to adjust the speed between 10000 and 31000 rpm to choose the best control for the application at hand, innovative height adjustment system incorporating a 0.4mm micro adjustment, active brake that stops the 18v Router Bit quickly plus plunge base that features 3 stop pins for multiple pass mortising.

Supplied with 2 x dust extraction attachments, 146 mm sub-base-plate that accepts 31.75mm guide bushings, 6mm and 6.35 mm collets, plunge base, 2 x side fences and a powerful dual LED lights to illuminate the work surface. This FUEL M18FTR-0X Milwaukee Router integrates three MILWAUKEE exclusive technologies, a POWERSTATE brushless motor, REDLITHIUM battery packs (NOT SUPPLIED) and REDLINK PLUS intelligence hardware and software delivering outstanding power, run-time and durability out on the work site. As with all Milwaukee M18 power tools this M18FTR-0X Milwaukee Router can be powered through the flexible battery system using by all Milwaukee M18 REDLITHIUM Batteries in the range

Specification of 18v Milwaukee M18FTR-0X Router

  • POWERSTATE brushless motor
  • 18v BODY ONLY no batteries or charger supplied
  • Variable speed dial 10000rpm to 31000rpm
  • 6 speed settings
  • 50mm plunge capacity
  • Collet capacity 6/6.35mm
  • 146mm sub-base-plate
  • Accepts 31.75mm guide bushings
  • Plunge base with 3 stop pins
  • x2 side fences
  • Dual LED job lights
  • 115mtr length of cut per 5Ah charge
  • Innovative height adjustment system 0.4mm micro adjustment
  • Active brake
  • Milwaukee article number 4933471603
  • REDLINK PLUS intelligence hardware and software
  • Milwaukee carry case
  • Weight 3.6kgs
  • All Milwaukee Power Tools from Power Tools UK are supplied with full industrial warranty
More Information
Review Average 0
Review Star Width 0
Review Count 0
Review Data Last Updated 1711616042

Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.


Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.

The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:

  • any damage to the product that is the result of improper maintenance
  • any product that has been altered or modified
  • any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
  • any damage caused by non-observance of the instruction manual
  • any non CE product
  • any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
  • any product connected to improper power supply (amps, voltage, frequency)
  • any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
  • normal wear and tear of spare parts
  • inappropriate use, overloading of the tool
  • use of non-approved accessories or parts
  • Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
  • Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.

Reviews