Bosch 0615A5008C Power Tool Kit
0 615 A50 08C Bosch Power Tool Kit with 3 x 18v x 4Ah ProCORE Batteries, 18v Fast Charger packed into a tough Bosch Toolbag. This kit consists of GSB18V-65 Combi Drill, GDR18V-215 Impact Driver, GWS18V-8 Angle Grinder, GBH18V-22 SDS-Plus Hammer Drill, GKS18V-51 Circular Saw and GST18V-125 Jigsaw.
Bosch GSB18V-65N Combi Drill
GSB18V-65 Bosch Combi Drill is a versatile 18v Combi Drill delivering the power required for tough screwdriving applications, able to tackle metal, wood, and plastic due to the uprated torque levels of 65Nm and 31Nm plus the additional impact function allows the machine to drill through masonry.
Tight, awkward spaces are no problem with this 18v Bosch Combi Drill due to a head length of just 175mm plus switchable Kickback Control preventing accidental tool kickback and dual working lights that flood the working area.
Technical Specification of Bosch GSB18V-65 Combi Drill
- Bosch brushless motor technology
- No load speed 1st gear 0 to 550rpm 2nd gear 0 to 2100rpm
- Impact rate 0 to 27000bpm
- Maximum torque hard 65Nm soft 31Nm
- Maximum drilling through wood 38mm
- Maximum drilling through metal 13mm
- Maximum drilling through masonry 13mm
- Maximum screw diameter 10mm
- 20 torque settings
- Metal keyless chuck 1.5mm to 13mm
- Switchable kick-back control
- Dual LED work lights
- Electronic cell protection
- SKU number 0 601 9N3 300
- 175mm head length
- Size l x w x h 175mm x 80mm x 210mm
- All Bosch Power Tools from Power Tools UK come with full industrial warranty
Bosch GDR18V-215 Impact Driver
GDR18V-215 Bosch Impact Driver a great choice of power tool when jobs involve driving multiple numbers of screws daily, this 18v Bosch Impact Driver gets the job done fast and with accuracy. The GDR18V-215 Impact Driver tackles wood and metal based materials easily driving 50mm screws and long screws of 80mm to 140mm into wood frames. It is great with metal too driving self-driving screws into sheet metal of 3mm, M8 machine screw into pre-threaded metal blocks, self-tapping screws into sheet metal of less than 3mm with the capacity to tighten and loosen nuts less than M10. The GDR18V-215 swiftly drives screws through wood or metal up to 3300rpm and with a maximum torque of 215Nm it easily handles screw-driving through hardwoods plus is ideal for hard-to-access tight spaces thanks to the120mm head length and compact design. This machine has 2 auto driving modes, metal and wood and also stops automatically or slows down when it reaches the surface of the material allowing for good quality finishing.
Technical Specification of GDR18V-215 Impact Driver
- Bosch brushless motor technology
- No load speed mode 1 0 to 2100rpm, mode 2 0 to 33rpm
- Maximum torque 215Nm
- 2 torque settings
- Impact rate mode 1 0 to 3000bpm, mode 2 3800bpm
- 1/4 internal hex tool holder
- Auto shutdown and auto slow functions
- Size l x h x d 120mm x 210mm x 80mm
- Weight 1kg
Bosch GWS18V-8-125 Angle Grinder
GWS18V-8-125 Angle Grinder, fast cutting performance from this compact 18v Angle Grinder when it comes to cutting rebar, metal sheets, PVC and tiles, or deburring light metal components and cut-offs.
Packing the equivalent of 800w corded power plus superb safety features and designed with a sleeker and longer grip than the previous generation of Bosch Angle Grinders, the grinder offers excellent control and ergonomic comfort to minimize fatigue. Thanks to the optimized run-time per battery charge, brushless motor and reduced charges, the GWS18V-8-115 gets more work done over the life of the machine.
Technical Specification of Bosch GWS18V-8-125 Angle Grinder
- Powerful brushless motor technology
- No load speed 11000rpm
- Disc diameter 125mm x 22.23mm bore
- Kickback control
- Restart protection
- Soft start feature
- Overload protection
- Backing flange
- Protective guard
- Auxiliary handle
- Improved sleek ergonomic grip
- One handed control
- Grinding spindle thread M14
- Locking nut
- Two hole spanner
- Size l x w x h 295mm x 230mm x 115mm
- Weight 1.6kgs
Bosch GBH18V-22X SDS-Plus Hammer Drill
GBH18V-22X Bosch SDS-Plus Hammer Drill, this 3 function power tool is a powerful machine for hammer drilling and chiselling into concrete and bricks also drilling through wood and steel. The OneChuck Toolholder, a single chuck that can accommodate SDS-Plus, Cylindrical and Hex Drill Bits, delivers a simplified and much more efficient work experience with continuous speed, minimized vibration effects, and dust-free work condition.
The GBH18V-22X is packed with power and features, elevating the drilling experience to a next level, more holes drilled per charge and stable power output delivered by the high quality 18v Bosch Brushless Motor and constant speed control. KickBack Control and Vibration Control increase protection against accidental jams and reduced vibration exposure respectively, also contributing to dust-free work conditions through the attachable Auto Power GDE18V-12/GDE12 extractor.
Technical Specification of Bosch GBH18V-22X SDS-Plus Hammer Drill
- Bosch brushless motor technology
- No load speed 0 to 1050rpm
- Impact rate 0 to 4675bpm
- OneChuck toolholder SDS-Plus, Cylindrical and Hex drill bits
- Hammer drilling range through concrete 4mm to 22m
- Maximum drilling through metal 13mm
- Maximum drilling through wood 26mm
- Kickback control
- Vibration control
- Constant speed control
- Electronic motor protection
- Bright LED worklight
- Auto power GDE18V12/GDE12 dust extractor attachment
- Auxiliary handle
- Depth gauge
- Size l x w x h 320mm x 105mm x 210mm
- Weight 2.6kgs
Bosch GKS18V-51 Circular Saw
GKS18V-51 Bosch Circular Saw designed for cross-cutting timber, ripping plywood and OSB boards plus bevel cuts through timber. The GKS18V-51 has a maximum cutting capacity of 51mm at 0 degrees and 35mm at 45 degrees offering unrestricted movement and effortless cutting thanks to its powerful 18V brushless motor.
Ideal for vertical and horizontal cuts due to the compact design and ergonomic handle ensuring a comfortable holding experience. This 18v Bosch Circular Saw keeps dust away from the cut line and workspace thanks to the improved dust extraction port design and dust blower function.
Technical Specification of Bosch GKS18V-51 Circular Saw
- Powerful brushless motor technology
- No load speed 5800rpm to 6300rpm
- Blade diameter 140mm x 20mm bore
- Optimised soft start function
- Smooth stop brake system
- Clear cut line using dust blower function
- Effortless cutting
- Clear view dust blower function
- Compact design and ergonomic handle
- Bright LED work light
- Dust extraction port design
- Size l x w x h 330mm x 160mm x 160mm
- Weight 2.2kgs
Bosch GST18V-125S Jigsaw
GST18V-125S Bosch Jigsaw, with barrel grip, gives the tradesman a robust design and powerful brushless motor ensures increased tool longevity and excellent tool run-time. Ideal for curved and cross cuts through solid wood, chipboard, and wood composites as well as for thicker or harder materials, it can be used with guide rails via an adapter. The baseplate of the GST18V-125S can be adjusted up to 45 degrees to make easy and precise bevel cuts, the machine comes with a removable plastic overshoe protecting sensitive workpieces.
This 18v Bosch Jigsaw is a reliable problem solver for all applications at an optimal price-performance ratio in this market segment. GST18V-125S Jigsaws keep it simple with a focus on core important functions such as SDS blade holder, bright LED job light, 4-stage pendulum, dust blower and speed selection. The tool is compatible with external dust extraction systems and all Bosch 18v Lithium Batteries and Chargers in the Bosch Professional 18v System
Technical Specification of Bosch GST18V-125S Jigsaw
- Bosch brushless motor technology
- No load stroke rate 500spm to 3500spm
- Stroke 26mm
- 4 stage pendulum cutting action
- Speed selection
- Bevel angle 45 degrees both sides
- Removable plastic shoe
- Curved and cross cuts through solid wood, chipboard and wood composites
- SDS blade holder
- Dust blower
- Bright LED work light
- Size w x l x h 445mm x 360mm x 150mm
- Weight 2kgs
