DeWALT DEWKIT20X Power Tool Kit
DEWKIT20X DeWALT Power Tool Kit powered by 2 x 18v x 2Ah and 4 x 18v x 5Ah Lithium Batteries plus 2 x 18v Multi-Voltage Chargers, this 20pce kit is packed into 4 Hard Case Power Tool Boxes, 2 Foam Inlays and Large Toolbag. The bespoke Power Tools UK 18v DEWKIT20X Kit includes the DCD996 Combi Drill, DCF887N Impact Driver, DCS565 Circular Saw, DCS334 Jigsaw, DCS356 Multi Tool plus 13 Accessories, DCL040 LED Pivot Torch, DCG405 Angle Grinder, DCH273 SDS-Plus Hammer Drill, DCW210N Random Orbit Sander, DCS367 Reciprocating Saw, DCP580 Planer plus DWV9390 Dust Bag, DCR020 DAB/FM Radio, DCN930N 1st Fix Frame Nailer, DCN660 2nd Fix Brad Nailer, DCW604 Router, DCF620 Drywall Screwdriver, DCS365 Mitre Saw, DCF891 Impact Wrench, DCV100 Blower and DCV584 L-Class Vacuum.
DeWALT DCD996 Combi Drill
DCD996 DeWALT Combi Drill, powerful XR brushless XRP Combi Drill comes with a tough 3 speed all metal transmission increasing run-time and tool life. Increased speeds at 38250bpm true masonry drilling speeds plus the electronic clutch allows selection of 11 different torque settings to optimise drilling applications.
Other features of these superb 18v Combi Drills include efficient intelligent trigger increasing control, new 2 position LED torch with high, medium and low settings, 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changing plus a steel belt hook and magnetic bit holder for strong industrial location
Technical Specification of 18v DeWALT DCD996 Combi Drill
- Brushless high powered motor
- 3 speed all metal transmission
- No load speeds 0 to 450rpm, 0 to 1300rpm and 0 to 2000rpm
- Beats per minute 0 to 8600bpm, 0 to 25500bpm and 0 to 38250bpm
- Maximum torque hard 95Nm, soft 66Nm
- 3 position LED torch high, medium and low settings
- 11 position adjustable torque electronic clutch
- Efficient intelligent trigger
- 13mm ratcheting keyless chuck with auto spindle lock
- Chuck capacity 1.5mm to 13mm
- Maximum drilling through wood 55m
- Maximum drilling through metal 13mm
- Maximum drilling capacity through masonry 16mm
- Improved grip design
- Steel belt clip and magnetic bit holder
- Size l x h x w 215mm x 210mm x 70mm
- Weight 1.7kgs
- All DeWALT Power Tools from Power Tools UK are supplied with full industrial warranties
DeWALT DCF887 Impact Driver
DCF887 DeWALT Impact Driver comes with a rugged and powerful brushless motor that gives the trade superb torque levels allowing heavier industrial applications. This DCF887 DeWALT Impact Driver use a Precision Drive mode giving tradesmen additional control for precision screw driving plus the latest drop in chuck design allows for quicker and easier bit changing
Technical Specification of 18v DeWALT DCF887 Impact Driver
- Brushless motor technology
- 3 speed tough motor
- No load speeds 0 to 1000rpm, 0 to 2800rpm, 0 to 3250rpm
- Impacts per minute 0 to 3800ipm
- Maximum torque 205Nm
- x3 LED HALO work light
- Drop in 1/4" bit holder
- Precision Drive mode
- Belt hook
- Magnetic bit holder
- Size l x h 135mm x 225mm
- Weight 1.4kgs
DeWALT DCS565 Circular Saw
DCS565 DeWALT Circular Saw 18v superb power tool is built round a tough DEWALT Brushless Motor extending run-time, reliability and overall durability includes a cast aluminium base for repetitive, accurate cuts. This DCS565 DeWALT Circular Saw features include variable adjustment of the bevel angle to 50 degrees, ultra thin kerf 165mm x 24 tooth carbide-tipped blade allowing efficient run-time and fast, smooth cut finish at maximum 55mm depth of cut.
This 18v Circular Saw lock off switch and electronic motor brake give the saw additional control and work safety plus optimum balance for safe, fatigue-free operation and a bright LED worklight improving cut line visibility. Other features include a dust blower that clears the cut line, built-in rafter hook, additional handle allowing safe two handed work and direct compatibility with the DEWALT AirLock system for easy, secure connection to extraction hose
Technical Specification of 18v DeWALT DCS565 Circular Saw
- Brushless motor technology
- No load speed 4950rpm
- 24 tooth TCT blade
- Blade diameter 165mm x 20mm bore
- Ultra thin kerf
- 50 degree bevel capacity
- 55mm depth of cut at 90 degrees
- 42mm depth of cut at 45 degrees
- Lock-off switch
- Electronic motor brake
- Cast aluminium base
- Optimum balance for fatigue free operation
- Bright LED work light improves cutline visibility
- Rafter hook
- Dust blower clears cut line
- Additional handle for two handed work
- Rip fence
- Hex key
- Dust extraction spout
- Size h x l 175mm x 315mm
DeWALT DCS334 Jigsaw
DCS334 DeWALT Jigsaw upgrade machine powered through a tough brushless motor that increases run-time and overall performance. The improved tool free blade change mechanism fitted to this DCS334 DeWALT Jigsaw keeps the blade secure and squarer during cutting allowing precision cutting under load. Bright dual LED's and the built in dust blower keep the workpiece free of debris and sawdust allowing the trade more accurate cuts. This 18v DeWALT Jigsaw also includes a dual action airlock allowing connection to compatible extraction kit
Technical Specification of 18v DeWALT DCS334 Jigsaw
- Tough brushless motor
- No load speed 3200rpm
- Maximum cutting capacity through wood 135mm
- Maximum cutting capacity through aluminium 25mm
- Bevel capacity 47 degrees
- Weight 2.7kgs
DeWALT DCS356 Multi Tool
DCS356 DeWALT Multi Tool designed with the latest 3 stage speed control, the trade no longer needs to feather the trigger for the ideal cutting speed. DCS356 DeWALT Oscillating Tool is powered through a tough brushless motor delivering up to 50% plus more run-time over the previous brushed motor, bright LED light illuminates reduced light areas around the site plus a universal accessory adaptor for use with most oscillating tool accessory brands.
Other features include a DUAL-GRIP variable speed trigger plus 3 stage speed control providing the ultimate speed and application control, the quick-change accessory system allows blades and attachments to be changed quickly without the use of tools. This DCS356 Oscillating Tool is supplied with a 13pce accessory set to support a range of cutting and sanding applications
Technical Specification of 18v DeWALT DCS356 Oscillating Tool
- DeWALT brushless motor
- Oscillations per minute 0 to 20000rpm
- Oscillating angle 1.6 degrees
- 3 stage speed control
- Bright LED work light
- Variable speed trigger control
- 3 stage speed control
- New fork design reducing weight and improving distribution
- Universal adapter
- Tool-free blade changes
- Dual grip with overmould
- Weight 1kgs
DeWALT DCL040 Torch
DCL040 DeWALT Torch using powerful LED technology, lightweight and compact 18v DeWALT Pivot Torches, impact resistant housing and tough LED bulb producing 110 lumens output and 10K hrs life plus 2 zone light pattern. The flashlight head on the DCL040 pivots more than 90 degree vertically with ratchet lock and the flashlight includes an integrated hook for hanging, also can be used free standing. The DCL040 torch is part of the intelligent XR Lithium Ion Series of DeWALT tools designed for efficiency and faster work applications.
Technical Specification of 18v DeWALT DCL040 Pivot Torch
- Bulb type LED
- Run time with 3Ah is 12hrs
- 10000 hrs bulb life
- 110 lumens
- Integrated hanging hook
- Belt clip and magnetic compatible
- Rubber grip
- Size h x l 240mm x 115mm
- Weight 0.26kgs
DeWALT DCG40N Angle Grinder
DCG405 DeWALT Angle Grinder built round a high powered 18v brushless motor and electronic brake stopping the motor and disc when the trigger is released plus the electronic clutch reduces the kick-back reaction back through the DCG405 in the event of a stall or pinch. The long life brushless motor is enhanced with mesh covers restricting dust and grime being sucked through the motor workings, safe working and ease of use with a rubber overmould for grip and comfort plus the two position handle gives greater control and flexibility
Technical Specification of 18v DeWALT DCG405 Angle Grinder
- Brushless motor technology
- No load speed 9000rpm
- Maximum disc diameter 125mm
- Electronic brake
- Electronic clutch
- Mesh motor covers
- Rubber overmould
- 2 position side handle
- Keyless protective guard
- 310mm long
- Weight 1.4kgs
DeWALT DCH273 SDS-Plus Hammer Drill
DCH273 DeWALT SDS-Plus Hammer Drill high speed drilling performance giving tradesmen more than 90 holes at 10mm x 80mm when coupled to a 5Ah li-ion battery. DCH273 SDS-Plus Hammer Drill has 3 modes including rotation stop for light chiselling into plaster, tiles and render plus impact mode for rotary only drilling into wood and metal, brushless motor technology gives superb run-time and reduced maintenance.
Other features of the DCH273 Hammer Drill includes an electronic clutch gives consistently high torque and improved durability makes these 18v Hammer Drills ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. A bright brilliant white LED work light with delay features improves visibility in low light areas around the site
Technical Specification of 18v DeWALT DCH273 SDS-Plus Hammer Drill
- Brushless motor technology
- No load speed 0 to 1100rpm
- Blows per minute 0 to 4600bpm
- Impact energy 2.1jls
- Rotation stop mode
- Impact stop mode
- Electronic clutch
- SDS-Plus chuck
- Maximum drilling capacity in wood 26mm
- Maximum drilling capacity in metal 13mm
- Maximum drilling capacity in concrete 24mm
- Bright white LED work light
- Multi position side handle
- Belt hook
- Compact lightweight ergonomic design
- Size l x h x w 300mm x 200mm x 85mm
- Weight 2.6kgs
DeWALT DCW210 Orbital Sander
DeWALT DCW210 Orbital Sander 125mm built round an impressive tough brushless motor that extends run-time and increases performance, designed and manufactured specifically for professional woodworkers. Features of this rugged 18v DeWALT Sander include easy reach speed control dial for fast one-handed speed adjustments, dual sealed switch preventing dust ingestion increasing the switch life plus an easy and quick replaceable 8-hole hook and loop sanding pad for fast efficient paper changes. This DCW210 DeWALT Sander uses a one-handed locking dust bag with DeWALT AirLock connection for direct safe fitting to an exterior dust extraction system
Technical Specification of 18v DeWALT DCW210 Orbital Sander
- 18v brushless motor
- Random orbit sander
- Extended run time and tool life
- Quick change hook and loop pad
- Sealed switch gear preventing dust infiltration
- Easy reach speed dial
- Soft grip from increased safety and comfort
- DeWALT AirLock system for efficient dust extraction
- Dust bag
- Weight 1.3kgs
DeWALT DCS367 Reciprocating Saw
DCS367 DeWALT Reciprocating Saw gives the trade an improved balance and ease of handling due to the design of the central motor position. The DCS367 DeWALT Reciprocating Saw comes with a 4 position blade clamp allowing flush cutting and overall improved versatility, the bright LED worklight improves visibility on low light areas around the site plus a lever action keyless blade clamp allows for handy and quick tool-free blade changes
Technical Specification of 18v DeWALT DCS367 Reciprocating Saw
- Brushless motor
- No battery or box supplied
- No load stroke rate 0 to 2900spm
- Stroke length 28.6mm
- 4 position blade clamp for flush cutting
- Lever action tool-free blade change
- Improved handling due to central motor position
- Bright LED worklight
- Compact allowing access to tight working areas
- Maximum cut through wood 300mm
- Maximum cut through steel sections and pipes 100mm
- Maximum cut through PVC 160mm
- Size l x h 365mm x 200mm
- Weight 2.3kgs
DeWALT DCP580 Planer
DCP580 DeWALT Planer comes with a tough 18v brushless motor features include indexed fine adjustment, 9mm rebate capacity, foot lock-off, 2mm depth of cut and 82mm reversible twin blades. DCP580 DeWALT Planer uses on-board blade storage allowing quick and easy blade changing, an air lock port is compatible with air lock or dust bag (not supplied) and on board torx key. Fine adjustment is achieved by 0.1mm increment depth adjustment plus the front and rear shoe is milled in situ increasing the accuracy. A DeWALT Dust Bag DWV9390 can be purchased as an optional extra for this machine as it does not come with the machine
Technical Specification of 18v DeWALT DCP580 Planer
- Brushless motor
- 82mm reversible twin blades
- 9mm rebate capacity
- Fine adjustment
- 2mm depth of cut
- Compact well balanced body
- Foot lock-off
- Air lock port
- On-board blade storage
- On-board torx key
- Weight 1.4kgs
DeWALT DWV9390 Dust Bag
DWV9390 DeWALT Dust Bag designed specifically for use in conjunction with DCP580 DeWALT Planers with a twist lock connection to the chip deflector allowing quick and easy emptying. Airlock compatible these DeWALT dust bags are sprung to hold their shape while in use and offer the trade a larger capacity extending working periods between having to stop and empty the bag
DeWALT DCR020 Radio
DCR020 DeWALT Radio gives the trade a compact and tough DAB and FM Jobsite Radios powered through 12v or 18v XR lithium batteries or 240v mains supply. DCR020 Radios have an on board Tech Box gives protection of audio equipment plus 3.5mm auxiliary port and USB charging port (USB charging through mains power only). This robust DeWALT Radio uses an integral roll-cage providing impact resistance takes the punishment when out on site, DCR020 DeWALT Radio does not charge DeWALT Batteries and is not supplied with any batteries
Technical Specification of DeWALT DCR020 Radio
- Integral roll-cage
- DAB and FM frequencies
- Powered through 12v or 18v XR li-ion batteries
- 1.8mtr power cord
- Wrap round cord storage
- Tech Box for on-board storage
- 3.5mm auxiliary port
- USB charging port
- Size l x h 240mm x 245mm
- Weight 2.8kgs
DeWALT DCN930 Framing Nailer
DCN930 DeWALT Framing Nailer has been engineered to deliver more power, more productivity and more durability than any previous 18v DEWALT Framing Nailer and comes complete with two operating modes allow the tradesman to choose from bump for precision placement and sequential for faster application speeds at up to 2 nails per second.
Built round a tough, durable DEWALT XR Brushless Motor giving the trade superb cordless gas free operation. Engineered with the latest internals delivers more power to drive nails more consistently and faster, while the new tougher driver blade and magnesium magazine improve durability where it matters out on the jobsite. Ideal for a wide range of first fix applications such as timber framing, stud work and roof battens, the DCN930 fires angled nails from 50mm to 90mm. The optimised size allows this 18v DeWALT Nailer to fit between 400mm joist centres improving ease of use along with the increased depth range adjustment, improved magazine loading system and metal rafter hook.
Technical Specification of DeWALT DCN930 Framing Nailer
- Powerful brushless DeWALT motor technology
- 2 operating modes bump or sequential
- Faster application speeds up to 2 nails per second
- Fires 50mm to 90mm angled nails
- No mar tip
- Increased depth range adjustment
- New magnesium magazine with improved loading system
- 30 to 34 degree magazine angle
- Nose design is optimised for toe-nailing
- Tool -free stall and jam clearance
- Dry-fire lockout ensuring protection from firing when the magazine is empty
- Ideal for timber framing, stud work and roof battens
- Convenient rafter hook
- Reversible belt hook
- Compatible with most paper tape nails on the market and optimized for both DNPT (Paper Tape) and DNW (Wire welded) nails
- Weight 3.4kgs
DeWALT DCN660 Nailer
16 gauge DCN660 DeWALT Nailer built round a tough Brushless DeWALT Motor gives superb run-times when matched with 18v lithium batteries that cannot be bettered from a compact package. The lightweight and ergonomic design makes this 18v Nailer easy and comfortable to use but tough enough for inside and outside work-sites. Mechanical rather than gas operation offers low running costs and consistent performance at temperatures -20 to + 50C plus a sequential mode allows precision placement and bump operating mode providing the trade with production speed of up to 4 nails per second.
Depth of drive on the DeWALT DCN660 Nailer can be easily adjusted using the thumb wheel depth adjuster, the easy use tool free stall or jam clearance minimises down time and trigger and contact trip lock-off and preventing accidental discharge of any fastener. DCN660 Nailer come with LED work lights to assist the trade in low light areas around the site but are also used as flashing warning lights for low battery condition and tool jams
Technical Specification of 18v DeWALT DCN660 Finish Nailer
- Brushless motor technology
- Bump and sequential trigger type
- Nail length 32mm to 63mm
- Nail diameter 1.6mm (16 gauge)
- Thumb wheel depth adjuster
- Magazine angle 20 degrees
- Rear loading magazine
- Magazine capacity 110 nails
- Fault indicator
- Integrated belt hook
- Tool free jam clearing
- Temperature range -20 to +50C
- Size l x w x h 310mm x 95mm x 325mm
- Weight 2.7kgs
DeWALT DCW604 Router
DCW604 DeWALT Router built with a lightweight aluminium motor housing, can be transitioned quickly to a fixed base attachment increasing the versatility of the Router. Features of this 18v DCW604 DeWALT Router include a variable speed control optimises cutter speed for different materials, soft start for smooth easy start up, an electronic brake that increases control and safety plus spindle lock making cutter changes quick and easy. The five position adjustable turret enables stepped or repeated plunge cut and bright dual LED lights increases visibility around the router bit during operation for increased accuracy plus the rubber overmould grips make using the machine more comfortable. This 18v DeWALT Router comes as a BODY ONLY machine packed into a tough TSTAK Box
Technical Specification of 18v DeWALT DCW604 Fixed Base Router
- 18v BODY ONLY power tool
- Router body with plunge base
- Variable speed control
- Plunge stroke 55mm
- Maximum cutter diameter 30mm
- 5 position adjustable turret
- Aluminium motor housing
- Fixed base
- 1/4" collet
- 17mm guide bush
- Spindle lock
- Electronic brake
- Parallel fence with guide rods (plunge body)
- Basic parallel fence (fixed base)
- Centering cone
- Dust extraction fixed base
- Dust extraction plunge base
- Rubber overmould grips
- 17mm spanner
- Weight 6kgs
DeWALT DCF620 Collated Drywall Screwdriver
DCF620 Collated Drywall Screwdriver with DCF6202 Collated Attachment supplied in a tough TSTAK Case, this 18v Drywall Screwdriver is built using a tough 4400rpm brushless motor offering the trade maximum run-time from a compact tool, one of the lightest and compact tools ensuring access to tight areas around the site. DCF620 Drywall Screwdriver uses a built-in LED work-light allowing work in low light small spaces and has a trigger lock, ergonomic rubber grip plus a locking nose cone, a set and forget feature remembers fine depth adjustment when removing or replacing the nose cone plus angled belt hook that can be positioned for left or right handed users and fixes the screwdriver strongly onto the tool belt
DeWALT DCF6202 Collated Attachment
DCF6202 DeWALT Collated Attachment to suit DCF620 and DCF621 Drywall Screw-guns, allows the trade tool-less screw length adjustment button 25mm to 50mm capacity. Other features include dis-assembly release button for occasional cleaning and blowout plus allows easy use of screw length marks and screw drive depth gauge and collated screw strip guide
Technical Specification of 18v DCF620 Drywall Screwdriver
- Brushless motor
- No load speed 0 to 4400rpm
- Maximum torque 5Nm to 30Nm
- Trigger lock
- Single screw locking nose cone
- Easy opening for quick cleaning
- Tool free depth control
- Fine depth control
- Rotating collated screw magazine
- LED work-light
- Set and forget feature
- Ergonomically designed rubber grip
- Angled belt hook
- Head length 335mm
- Size l x h 380mm x 235mm
- Weight 1.6kgs
DeWALT DCS365 Mitre Saw
DCS365 DeWALT Mitre Saw using a powerful double insulated 65mm fan cooled motor with quick and easy replaceable brushes giving tradesmen maximum power through hard wood applications. DCS365 DeWALT Mitre Saw has a newly re-designed mitre angle adjustment system providing accurate and consistent mitre angle settings from 0 to 48 degrees right and left.
The excellent DeWALT XPS Shadow line cut indicator allows fast accurate alignment of the blade while illuminating the work piece to assist with increased productivity. A dual fence mechanism gives maximum support when making large material cuts at any angle or combination of angles plus the horizontal rails allow for additional capacity. DCS365 Mitre Saws are built on a strong aluminium base providing stability while remaining lightweight for easy use and transportation around the site
Technical Specification of 18v DeWALT DCS365 Mitre Saw
- No load blade speed 3750rpm
- Blade 184mm x 16mm bore
- Approximate 200 cuts per charge soft wood 75mm x 50mm
- Approximate 320 cuts per charge MDF skirting 18mm x 119mm
- Bevel capacity 48 degrees
- Mitre capacity right and left 48 degrees
- Mitre and bevel angle detents for quick and easy setting
- Large dual fence sliding mechanism
- Horizontal rails
- Cutting capacity at 90/90 degrees (w x h) 250mm x 50mm
- Cutting capacity at 45/90 degrees (w x h) 176mm x 50mm
- Cutting capacity at 90/45 degrees (w x h) 250mm x 35mm
- Cutting capacity at 45/45 degrees (w x h) 176mm x 35mm
- XPS shadow line indicator
- Rigid lightweight aluminium base
- Full dust control including dust bag
- Size d x l x h 590mm x 490mm x 590mm
- Weight 11.5kgs
DeWALT DCF891 Impact Wrench
DCF891 DeWALT Impact Wrench powered through an efficient brushless motor and 1/2 square drive anvil plus hog ring allowing for quick socket changes, this ultra compact and lightweight 18v DeWALT Impact Wrench allows the trade easy access in confined areas. Main features include a newly designed optimised mechanism delivering up to 1152Nm breakaway torque and 813Nm of fastening torque ensures removal of the tightest bolts, variable speed trigger allowing complete control over all applications and tactile 4 mode select feature allowing the trade to select different modes and speed settings for ultimate control and performance.
The precision wrench mode prevents over-tightening in forward and nut run-off in reverse. An ultra-bright white LED work light with delay feature improves visibility and functionality plus the brightness control allows dimming or turn off to suit the working conditions. The DCF891 Impact Wrench comes with a comfortable rubber XR grip and switch for greater application comfort and maximum control throughout extended shifts
Mode 1 Low Speed Forward tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed
Mode 2 Mid Speed Forward tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed
Mode 3 High Speed Forward tool operates at normal speed, reverse tool operates at normal speed
Mode 4 Precision Wrench Forward tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off
Technical Specification of 18v DeWALT DCF891 Impact Wrench
- Brushless motor technology
- Optimised impact mechanism
- Breakaway torque 1152Nm
- Fastening torque 812Nm
- Variable speed trigger
- Tactile 4 mode select feature with precision wrench
- 1/2 square anvil with hog ring
- Super bright adjustable LED
- Compact head design 175mm
- Ultra compact lightweight design
- Comfortable rubber grip and switch increased comfort and maximum control
- Weight 1.6kgs
DeWALT DCV100 Compact Blower
DCV100 DeWALT Compact Blower compact and lightweight design ideal for cleaning up the jobsite, a variable speed slider switch with variable speed trigger improves overall control. DCV100 DeWALT Blowers has a lock-on switch for easy safe use and is supplied with inflator/deflator attachments allowing versatile applications
Technical Specification of 18v DeWALT DCV100 Blower
- Power output 265w
- Fan speed 18000rpm
- Air speed 80mtr/sec
- Air throughput 2.8mtr3/min
- Variable speed slider
- Variable speed trigger
- Lock-on switch
- Supplied with round nozzle, extension. inflator and deflater attachments
- Length 510mm
- Weight 1.3kgs
DeWALT DCV584L Dust Extractor
DCV584L FLEXVOLT Dust Extractor powerful L-Class Wet and Dry Vacuum powered through 54v DeWALT FLEXVOLT Batteries runs at 18v to increase the overall run-time per charge. DeWALT Airlock attachments lock the dust extraction hose directly onto compatible power tools allowing full flexibility around the work surface. DCV584L FLEXVOLT Dust Extractors can handle wet or dry work without the need to change filters plus the durable large storage tank reduced wasted downtime emptying the machine.
Other features include on-board tool storage system for holding additional nozzles and accessories gives easy access, handy blower function quickly clearing the working area and around 2mtr working length hose. Although the DCV584L gives the trade full flexibility of cordless these dust extractors can also work through 240v mains power using the easy wrap cord situated around the top handle of the machine
Technical Specification of 54v/18v FLEXVOLT DCV584L Dust Extractor
- 54v/18v FLEXVOLT System
- 240v mains power
- Can also be powered by slide fit 18v DeWALT Batteries
- L-Class filter traps 99.97% of dust down to 0.3 microns
- Wet and Dry function uses same filter
- DeWALT air lock connectors
- 2mtr hose
- On board storage
- Additional nozzles and accessories
- Blower function
- Easy wrap cord management system
- Ergonomic carry handle
