Makita DK0176G205 Power Tool Kit 2-40v-2.5Ah Lithium Batteries 2pce

Makita DK0176G205 Power Tool Kit

DK0176G205 Makita Power Tool Kit brings together the HP001G Combi Driil and the TD003G Impact Driver two of the main 40v Makita Power Tools in one kit. These machines are powered through 2 x 40v x 2.5Ah Lithium Batteries plus a powerful 40v Charger all packed into a tough Makita power tool box.

Makita HP001GZ Combi Drill

HP001GZ Makita Combi Drill from the latest XGT machines from Makita Power Tools built round tough brushless technology motor this 40v Combi Drill gives the trade easy reach trigger speed control, 2 mechanical gears, an electric brake and electronic clutch. Other features of this ground breaking power tool include easy change forward and reverse action, active feedback sensing technology (AFT) that shuts down the machine protecting the tradesman if rotation speed suddenly slows down.

A single sleeve keyless chuck allowing quick bit install/removal using only one hand plus the built-in bright LED worklight allows safe working in low light areas around the site with a digital display confirming a visual display of selected torque.

Technical Specification of 40v Makita HP001GZ Combi Drill

• Part of the XGT Makita range
• Brushless motor technology
• No load speed high 0 to 2600rpm
• No load speed low 0 to 650rpm
• Blows per minute high 0 to 39000ipm
• Blows per minute low 0 to 9750ipm
• Drilling capacity through steel 20mm
• Drilling capacity through wood 76mm
• Drilling capacity through masonry 20mm
• Torque settings 21 (high) 41 (low)
• Maximum fastening torque soft joint 68Nm
• Maximum fastening torque hard joint 140Nm
• Electric brake
• 2 mechanical gears
• Variable speed control through the trigger
• Active feedback Sensing Technology (AFT)
• Electronic clutch
• Digital display conforming torque selection
• Single sleeve keyless chuck
• LED work light
• Weight 1.7kgs
• All Makita Power Tools from Power Tools UK come with full industrial warranty

Makita TD003G Impact Driver

TD003GZ Makita Impact Driver features a combination of sufficient fastening performance and high cost-competitiveness that can be easily and quickly achieved by carefully selecting from the useful functions available on the TD003GZ in conjunction with low power consumption due to the powerful maintenance free Makita brushless motor.

The main features and benefits in using this 40v Makita Impact Driver include 4 standard impact power modes, Maximum, Hard, Medium and Soft plus T-mode when dealing with thin metals. Weight is kept to a minimum due to the aluminium hammer case, a bright LED worklight illuminates the work surface plus the battery protection system automatically shuts off the power when the battery level is low. Fitted with a black bumper the rubber grip on the handle plus eXtreme Protection Technology (XPT) greatly improves dirt and water resistance allowing the machine to be used in harsh difficult condition around the job site.

Technical Specification of Makita TD003G Impact Driver

• Tough Makita brushless motor technology 
• No load speed 0 to 1100rpm, 0 to 2100rpm, 0 to 3200rpm and 0 to 3700rpm
• Impacts per minute 0 to 1400ipm, 0 to 2600ipm, 0 to 3600ipm and 0 to 4100ipm
• 4 mode impact power selection Maximum, Hard, Medium and Soft for Bolts
• T mode for thin metal work  
• Maximum fastening torque 20Nm, 50Nm, 170Nm and 210Nm
• Maximum torque 210Nm
• Driving shank 1/4"
• Bright LED light illuminates the worksite 
• Aluminiuim hammer case
• Black bumper
• Low power consumption thanks to brushless motor
• eXtreme Protection Technology (XPT) engineered for improved dust and water resistance for work in harsh conditions
• Rubber gripped handle ensures a good working grip
• Battery protection system automatically shuts off power when the battery level is low
• Size l x w x h 120mm x 85mm x 255mm
• Weight 1.1kgs