Milwaukee 4932478135 Banded Ear Plugs
Milwaukee 4932478135 Banded Ear Plugs
4932478135 Milwaukee Banded Ear Plugs allows for 3 wear points, above head, below chin and behind the neck with pivoting arms to adjust and pivot the band to a secure and comfortable position while being worn. These 4932478135 Milwaukee Ear Plugs can be worn continuously even if the wearing position is changed for permanent protection, durable and comfortable band for extended use. Includes interchangeable foam earplugs and flanged earplugs included with protection level to European Certified hearing protection: EN 352-2 (SNR TPR ear plugs = 32 dB; SNR Foam ear plugs = 33 dB)
Specification of Milwaukee 4932478135 Banded Ear Plugs
- Durable and comfortable banded ear plugs for extended use
- Band material ABS, POM Plug material polyurethane or TPR
- Care instructions gently rub clean with damp cloth
- Noise reduction rating 32dB SNR (H = 32; M = 28; L = 27 dB)
- Rating EN 352-2:2020 SNR = 32 dB
- Safety standard CE Category 3;UKCA
- Wear above head, below chin or behind neck
- Pivoting arms to secure and comfort positioning
- Continuous wear for permanent protection
- Interchangeable foam earplugs plus flanged earplugs included
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1713870542 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.