Milwaukee HD18CS-502B Circular Saw 2-18v-5Ah REDLITHIUM Batteries
Milwaukee HD18CS-502B Circular Saw
HD18CS-502B Milwaukee Circular Saw is powered by 2 x 18v x 5Ah REDLITHIUM Batteries plus 18v Charger uses REDLINK overload protection electronics in the tool and battery pack delivering superb extended durability, with the powerful Milwaukee motor easily cuts through most timbers at around 3500rpm. Features of this HD18CS-502B Milwaukee Circular Saw include an electronic brake, large 50 degree bevel facility, magnesium upper and lower guards increasing impact resistance and superb visibility of the cutting line. The 165mm x 24 tooth saw blade powers through plenty of material around the siteSpecification of 18v Milwaukee HD18CS-502B Circular Saw
- 2 x 18v x 5Ah REDLITHIUM batteries
- Fast lithium charger
- No load speed 3500rpm
- Blade 165mm diameter
- 16mm bore
- 24 tooth blade
- Electronic brake
- Magnesium upper and lower guards
- 50 degree bevel
- Maximum cutting depth at 90 degrees 55mm
- Maximum cutting depth at 45 degrees 39mm
- REDLINK overload protection electronics
- Individual battery cell monitoring
- Fuel gauge display
- Cutting line visibility
- Parallel guide
- Dust port
- Allan key
- Milwaukee toolbag
- Weight 3.8kgs
- All Milwaukee Power Tools from Power Tools UK supplied with full industrial warranties
Review Average | 0 |
---|---|
Review Star Width | 0 |
Review Count | 0 |
Review Data Last Updated | 1713574296 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.