Milwaukee M12CLL4P-0C Cross Line Laser 4 Points 12v BODY ONLY
Milwaukee M12CLL4P-0C Cross Line Laser
12v BODY ONLY M12CLL4P-0C Milwaukee Cross Line Laser green cross line laser with 4 points providing all-in-one functionality with horizontal levelling, vertical alignment, plumb point transfer from floor to ceiling and horizontal point transfer. High intensity green beams provide a working range out to 38mtr and out to 100mtr with a detector (not supplied), providing all-day run-time of 9 hours + from a 12v x 3Ah REDLITHIUM Battery (not supplied) with this M12CLL4P-0C.
Outstanding features include a 3 mode pendulum system, Manual Mode for use at any angle, Self-Levelling Mode indicating out-of-level condition with a 4 degree self-levelling range and Pendulum Lock Mode protecting components during transportation to and from site. An integrated magnetic bracket with rear mounted amplified rare earth magnets, 1/4 and 5/8 tripod thread plus hang hole allows attachment to steel stud, wooden stud and tripod. The bracket also provides the laser 360 degree rotation pivoting on plumb point, an integrated micro control knob allows faster point to point alignment. This green laser line Milwaukee Cross Line Laser has a robust over-moulded construction with an IP54 rating, the laser is water and debris resistant withstanding up to 1mtr drops on to a hard surface
Technical Milwaukee M12CLL4P-0C Cross Line Laser
- Green laser lines
- Green plumb points
- Laser projection 1 x horizontal, 1 x vertical, 2 x plumb points and 2 x horizontal points
- Accuracy 0.3mm/mtr
- Self levelling range 4 degrees
- Self levelling time up to 3 seconds
- 38mtr working range
- 100mtr working range with detector (not supplied)
- 3 mode pendulum system
- 4 degree self levelling
- Around 9hr runtime from 12v x 3Ah battery pack
- Pendulum lock
- Integrated magnetic bracket
- Rear mounted amplified rare earth magnets
- Target plate
- Track clip
- 1/4 and 5/8 tripod thread
- Hang hole
- IP54 water and debris resistance
- Carry case
- Weight 1.3kgs
- All Milwaukee Measuring Tools from Power Tools UK come with full industrial warranty
Technical Milwaukee M12CLL4P-0C Cross Line Laser
- Green laser lines
- Green plumb points
- Laser projection 1 x horizontal, 1 x vertical, 2 x plumb points and 2 x horizontal points
- Accuracy 0.3mm/mtr
- Self levelling range 4 degrees
- Self levelling time up to 3 seconds
- 38mtr working range
- 100mtr working range with detector (not supplied)
- 3 mode pendulum system
- 4 degree self levelling
- Around 9hr runtime from 12v x 3Ah battery pack
- Pendulum lock
- Integrated magnetic bracket
- Rear mounted amplified rare earth magnets
- Target plate
- Track clip
- 1/4 and 5/8 tripod thread
- Hang hole
- IP54 water and debris resistance
- Carry case
- Weight 1.3kgs
- All Milwaukee Measuring Tools from Power Tools UK come with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1714310400 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
