Milwaukee M12CML-401 Colour Matching Light 1-12v-4Ah REDLITHIUM Battery
Milwaukee M12CML-401 Colour Matching Light
M12CML-401 Milwaukee Colour Matching Light supplied with 1 x 12v x 4Ah REDLITHIUM Battery and 12v Charger. The M12CML-401 gives the trade superb high definition lighting with up to 1000 lumens, 98+ colour rendering index for use to identify accurate and reliable colour recognition. Other features include 5 different colour temperatures, for the trade to replicate real sunlight requirements, up to 14 hours of run-time off a M12 x 4Ah battery pack. This colour matching light has an IP54 water and dust resistant rating and 2mtr impact resistant plus a magnetic attachment allowing easy hands-free use.Milwaukee M12CML-401 Colour Matching Light
- 1 x 12v x 4Ah REDLITHIUM battery
- 12v charger
- 1000 maximum lumens
- Maximum light output area mode high 1000 lumens, medium 600 lumens and low 300 lumens
- Maximum run-time with M12B4 REDLITHIUM battery high 6hrs, medium 8hrs and low 14hrs
- RG1 blue light hazard risk group
- 98+ colour rendering index identifying accurate reliable colour recognition
- 5 different colout temperatures replicates real sunlight requirements
- IP54 water and dust resistant
- 2mtr drop impact resistant
- Magnetic attachmernt for hands free use
- All Milwaukee Power Tools from Power Tools UK come with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1714313623 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.