Click Fraud
£5.75 + VAT delivery per order UK mainland and NI

Milwaukee M12SI-0 Soldering Iron 12v BODY ONLY

Be the first to review this product

In stock
Please allow up to 3 working days to deliver
Product Code:
£68.40 £57.00

View Product Information

Milwaukee M12SI-0 Soldering Iron

12v BODY ONLY M12SI-0 Milwaukee Soldering Iron uses 3 locking head positions to work in multiple orientations 0 degrees, 45 degrees and 90 degrees and quick heat up time as the tool is ready to use in 20 to 30 seconds. The M12SI-0 Milwaukee Soldering Iron uses dual colour LED lights notify the user flashing green when tool is heating up, solid green when the tool is ready for operation and solid red when the tool is off but the tip is hot to touch until the red LED turns off. Other features include tool free replaceable tips, temperature monitoring to maintain heat throughout tough applications and the brightest LED light for increased visibility of soldering application

Specification of 12v Milwaukee M12SI-0 Soldering Iron

  • 12v BODY ONLY power tool
  • Heater power 90w
  • Temperature range 400C
  • Quick heat up ready on 20 to 30 seconds
  • 3 locking head positions 0, 45 and 90 degrees
  • Dual colour LED lights
  • Temperature monitoring for tough applications
  • Bright LED work light
  • Weight 0.5kgs
  • All Milwaukee Power Tools from Power Tools UK are supplied with full industrial warranty
More Information
Review Average 0
Review Star Width 0
Review Count 0
Review Data Last Updated 1718853380

Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.

Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.

The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:

  • any damage to the product that is the result of improper maintenance
  • any product that has been altered or modified
  • any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
  • any damage caused by non-observance of the instruction manual
  • any non CE product
  • any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
  • any product connected to improper power supply (amps, voltage, frequency)
  • any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
  • normal wear and tear of spare parts
  • inappropriate use, overloading of the tool
  • use of non-approved accessories or parts
  • Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
  • Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.