Milwaukee M18BH-0 SDS-Plus Hammer Drill 18v BODY ONLY
Milwaukee M18BH-0 SDS-Plus Hammer Drill
18v BODY ONLY M18BH-0 Milwaukee SDS-Plus Hammer Drill high performance, tough industrial 4 pole motor delivers maximum power with a superb power to weight ratio. Features of these powerful 18v Milwaukee Hammer Drills includes 2 mode operation allowing a switch between rotary hammer or rotation only for total versatility, forward and reverse action, low vibration value of 10.3m/s2 and bright LED work light illuminating darker spaces around the siteSpecification of 18v Milwaukee M18BH-0 SDS-Plus Hammer Drill
- 18v BODY ONLY power tool
- Milwaukee 4 pole industrial motor
- No load speed 0 to 1300rpm
- Maximum percussion rate 7000bpm
- Blow energy (EPTA) 1.2jls
- 2 mode operation
- Rotary hammer or rotation only
- Maximum drilling through steel 10mm
- Maximum drilling through wood 16mm
- Maximum drilling through concrete 16mm
- Optimised drilling capacity in concrete 5.5mm to 13mm
- Forward and reverse action
- REDLINK overload protection electronics
- Fuel gauge displaying remaining charge
- Optimised hammer drilling from 4mm to 10mm
- Low vibration value 10.3m/s2
- 43mm neck size
- Compatible with M12DE dust extractor
- Superior LED work light
- Weight 1.8kgs
- All Milwaukee Power Tools from Power Tools UK are supplied with full industrial warranties
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1714010770 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
