Milwaukee M18BTP-0 Transfer Pump 18v BODY ONLY
Milwaukee M18BTP-0 Transfer Pump
18v BODY ONLY M18BTP-0 Milwaukee Transfer Pump lighter than corded transfer pumps at just 3.4kgs with equal performance with a flow rate of 1817 l/h plus a delivery rate of 908 litres of transferred water from one M18 x 5Ah battery charge. Features include for water and debris only, 3/4" BSPT male thread reception for use with standard water hoses (for the inlet a hose with 19mm inner diameter is recommended optimising performance).
The M18BTP-0 Milwaukee Transfer Pump flexible impeller and powerful motor generate a lift height up to 5.5mtr and a head height up to 23mtr with REDLINK intelligence that recognises when the Transfer Pump stops moving water and automatically shuts itself off to avoid dry pumping. As with all Milwaukee M18 power tools this M18BTP-0 Milwaukee Transfer Pump can be powered through the flexible battery system using all Milwaukee M18 REDLITHIUM Batteries in the range
Specification of 18v Milwaukee M18BTP-0 Transfer Pump
- 18v BODY ONLY power tool
- Flow rate 1817 ltr/hr
- Flow rate 30 ltr/min
- Delivery rate 908ltr/hr
- Maximum suction lift 5.5mtr
- Maximum water lift 23mtr
- Maximum water temperature 60 degrees
- Flexible impeller
- Powerful motor
- REDLINK intelligence protects against dry pumping
- 3/4" BSPT male thread reception
- Milwaukee article number 4933471494
- Weight 3.4kgs
- All Milwaukee Power Tools from Power Tools UK come with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1713426415 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.