Milwaukee M18FN15GA-0X Finish Nailer 18v BODY ONLY
Milwaukee M18FN15GA-0X Finish Nailer
18v BODY ONLY M18FN15GA-0X Milwaukee Finish Nailer, excellent power to consistently seat nails sub-flush to the surface in hardwoods and Ready to Fire Nail Technology eliminates ramp-up time between each nail discharge. The M18FN15GA-0X Finish Nailer does not use gas cartridges for power therefore requires no extensive cleaning, designed to deliver durability and reliability to the most demanding trades with very little maintenance due to 18v cordless power.
Features of this 18v Milwaukee Finish Nailer include producing a smaller nail hole, the exact size of the nail head leaves a neater finish, small work contact bracket allows the trade to fire and sink nails at a more acute angle, different shaped noses are stored on the body of the power tool allowing the trade to get the best finish no matter what the application plus tool-free, quick and easy depth adjustment to assure nails are driven sub-flush and dry-fire lockout that stops the power tool being fired when there are no nails left in the magazine. The M18FN15GA-0X fires up to 1200 nails per charge off a REDLITHIUM 2Ah battery pack maximising productivity, a magazine capacity of 110 and allows quick access and easy clearing of jams plus the bright LED worklight illuminates the work surface for better placement of nails
The machine integrates three MILWAUKEE exclusive technologies, a POWERSTATE brushless motor, REDLITHIUM battery pack (not supplied with this machine) and REDLINK PLUS intelligence hardware and software, delivering outstanding power, run-time and durability out on the jobsite
Specification of Milwaukee M18FN15GA-0X Finish Nailer
- 18v BODY ONLY power tool
- POWERSTATE brushless motor technology
- Collation angle 34 degrees
- Magazine angle 34 degrees
- Nail diameter 1.8mm
- Nail type 32mm to 64mm
- Exact size of nail head gives neater finish
- Ready to Fire Nail Technology no ramp-up time
- Small work contact bracket
- Tool free quick and easy depth adjustment
- Dry-fire lockout
- Different shaped noses stored on-board
- Fires up to 1200 nails per 2Ah REDLITHIUM charge
- Magazine capacity 110
- Quick access and easy cleaning of jams
- Bright LED work light
- REDLINK PLUS intelligent software
- Milwaukee article number 4933478091
- Milwaukee kit box Weight 2.8kgs
- All Milwaukee Power Tools from Power Tools UK comes with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1713438754 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
