Milwaukee M18ONEPP4A3-503B Power Tool Kit
M18ONEPP4A3-503B Milwaukee Power Tool Kit powered by 3 x 18v x 5Ah REDLITHIUM Batteries, 18v Fast Charger packed into a tough Milwaukee Contractors Toolbag. The kit comes with four of the most popular 18v Milwaukee ONE-KEY Power Tools in the range including a M18ONEPD3 Combi Drill, M18ONEID3 Impact Driver, M18ONEFSAG115XPDB 115mm Angle Grinder and M18ONEFHX 4 Mode SDS-Plus Hammer Drill.
**BUY, VALIDATE, REDEEM Milwaukee Outside Power Equipment Promotion February/March 2026**
Purchase this superb M18 FUEL Power Tool Kit during the promotion period and redeem a FREE M18 Jobsite Speaker from Milwaukee. Use this easy link to receive your Jobsite Speaker FOC https://uk.milwaukeetool.eu/uk_redemption/
Milwaukee M18ONEPD3 Combi Drill
M18ONEPD3 Milwaukee Combi Drill generation 4 Milwaukee Combi Drill gives the trade a higher power efficiency under load with outstanding torque up to of 158Nm, save up to 3 custom settings to the tools memory for fast selection on the jobsite plus the extremely compact design of just 175mm length allows access into tight spaces around the site.
Other features of this 18v Milwaukee Combi Drill include adjustable trigger control for all applications, control speed, torque, start and end speeds, anti-kickback functions and bright LED work light. Connect via Bluetooth with the ONE-KEY app, ONE-KEY tool tracking, security and remote locking offers a free of charge cloud-based tracking network and inventory management platform for Milwaukee Power Tools.
Technical Specification of Milwaukee M18ONEPD3 Combi Drill
- 18v FUEL ONE Key power tool
- No load speed gear 1 0 to 500rpm
- No load speed gear 2 0 to 2100rpm
- Maximum torque 158Nm
- Maximum percussion rate 0 to 33000bpm
- Maximum drilling through wood 89mm
- Maximum drilling through steel 16mm
- Maximum drilling through masonry 16mm
- Chuck capacity 13mm
- Higher power efficiency under load
- Save up to 3 custom settings
- Adjustable trigger control for all applications
- Configure applications choosing optimum tool settings for repeatable precision
- Control speed, torque, start and end speeds, anti-kickback functions
- Bright LED worklight
- Side handle
- All metal reversible belt clip
- ONE-Key tool tracking and security FOC cloud based tracking network
- Weight 2.2kgs
- All Milwaukee Power Tools from Power Tools UK come with full industrial warranty
Milwaukee M18ONEID3 Impact Driver
M18ONEID3 Impact Driver superb generation 4 ONE-Key 18v Milwaukee Impact Driver allows the trade to save up to 3 custom settings in the tool memory for fast repeat selection out on site. Other leading features include a tough 1/4" hex drive, fast driving speed up to 3900rpm and 4400ipm, control speed, torque, impacts, start and end speeds, anti-kickback functions through adjustable trigger control plus the compact design allows access into tight difficult to reach areas around the site.
Low light areas can be overcome using the bright LED worklight and an all metal reversible belt clip hangs the M18ONEID3 safely and easily allowing hands free work when required. Configure the machine for any application using the ONE-Key App and Bluetooth connection.
Technical Specification of Milwaukee M18ONEID3 Impact Driver
- Generation 4 ONE-Key 18v Milwaukee Impact Driver
- No load speeds 1750rpm, 3000rpm, 4000rpm and 0 to 4000rpm
- Impact rate 1200ipm, 3400ipm, 4300ipm and 0 to 4400ipm
- Maximum torque 119Nm, 176Nm, 226Nm and 0 to 226Nm
- Maximum fastening torque 226Nm
- 1/4" Hex drive tool reception
- Save up to 3 custom settings in the tool memory
- 115mm head length
- Configure to any application
- Control speed, torque, impacts, start and end speeds and anti-kickback functions
- Save profiles for application specific repeatable precision
- Bright LED worklight
- All metal reversible belt clip
- Connect via Bluetooth with the ONE-Key app
- Weight 1.7kgs
Milwaukee M18ONEFSAG115XPDB Angle Grinder
M18ONEFSAG115XPDB Milwaukee Angle Grinder delivers performance similar to a mains powered 1200w Angle Grinder, integrating MILWAUKEE exclusive technologies, POWERSTATE brushless motor and REDLINK PLUS intelligence hardware and software delivering outstanding power, run-time and durability out on the jobsite. The M18ONEFSAG115XPDB features include RAPIDSTOP for fastest disc brake in less than 2 seconds and best user protection, compact gearhead and lower angle of battery slot allowing better balance and ergonomics compared to previous machines plus non-lockable safety paddle switch with line-lock-out function preventing automatic start up.
This superb 18v Milwaukee Angle Grinder uses ONE-KEY tool locking, tracking and security giving the trade a cloud-based inventory management platform that supports both location tracking and importantly theft prevention, 115mm keyless guard for great cutting capacity and fast guard adjustment without using a key plus a very useful anti-vibration side handle that lowers the vibration back through to the user
Technical Specification of 18v Milwaukee M18ONEFSAG115XPDB Angle Grinder
- Tough brushless POWERSTATE motor technology
- ONE-KEY tool locking, tracking and security
- No load speed 8500rpm
- 115mm disc diameter
- RAPIDSTOP disc braking in less than 2 seconds
- Soft start function
- Non lockable deadman paddle switch
- Compact gearhead
- Lower battery slot angle
- Removable dust screen protects the motor against debris
- Slim easy grip body design
- Anti-vibration side handle
- 115mm keyless guard allows greater cutting capacity
- REDLINK PLUS intelligence hardware and software
- Weight 2.6kgs
Milwaukee M18ONEFHX SDS-Plus Hammer Drill
Milwaukee M18ONEFHX SDS-Plus Hammer Drill designed round a powerful Milwaukee POWERSTATE motor allowing the trade to select from 4 drilling modes, hammer only, hammer drilling, drilling only and variolock. This compact and lightweight 18v FUEL Milwaukee Power tool uses a powerful rotary hammer action with the impact mechanism providing 2.5jls of impact energy and a variable no load speed up to 1400rpm.
Other general features include an all metal gear housing with precision gear fit that extends machine life, FIXTEC tool-less chuck changing, battery fuel gauge plus battery cell optimisation for maximum tool run time. The M18ONEFHX SDS-Plus Hammer Drill benefits from the Milwaukee REDLINK PLUS intelligence hardware and software delivering outstanding power, run-times and durability out on site
Technical Specification of 18v Milwaukee M18ONEFHX SDS-Plus Hammer Drill
- 18v FUEL Milwaukee Power Tool
- POWERSTATE brushless motor technology
- No load speed 0 to 1400rpm
- Impact rate 0 to 5000imp
- Impact energy 2.5jls
- 4 drilling modes hammer only, hammer drilling, drilling only and variolock
- Maximum drilling diameter through wood 30mm
- Maximum drilling diameter through steel 13mm
- Metal gear housing
- Precision gearbox
- FIXTEC tool less chuck change
- SDS-Plus chuck
- 13mm keyless chuck
- Battery fuel gauge
- Side handle
- Depth gauge
- Compatible with M18CDE dust extraction system
- Weight 2.5kgs
