Milwaukee M18SLED-0 Search Light LED 18v BODY ONLY
Milwaukee M18SLED-0 LED Search Light
18v BODY ONLY M18SLED-0 LED Milwaukee Search Light with TRUEVIEW high definition lighting plus pivoting head providing 1250 lumins with up to 650mtr beam distance. These powerful search lights come with 4 different output modes spot, flood, spot/flood and strobe delivering multiple options in the work place plus IP54 rating protecting the M18SLED-0 from dust, light rain and splashing water. The spot mode for long range identification very useful for utility pole/high voltage cable inspection, extended runs of conduit, cast or copper pipes, underground and bridge work, the flood mode illuminates close work spaces. Supplied with an ergonomic grip with rubber overmould enhances user comfort and grip during use plus key hole for hanging function
Specification of 18v M18SLED-0 LED Search Light
- 18v BODY ONLY light
- 4 output modes
- TRUEVIEW high definition lighting
- Maximum light output:-
Spot 1250 lumins
Flood 1200 lumins
Spot 600 lumins
Strobe 1200 lumins - Maximum run time on 5Ah REDLITHIUM battery:-
Spot 4hrs
Flood 4hrs
Spot 7hrs
Strobe 5hrs - Maximum beam distance 650mtr
- Fully pivoting head
- Ergonomic grip with rubber overmould
- Key hole for hanging
- IP54 rating
- Weight 0.9kgs
- All Milwaukee Power Tools from Power Tools UK are supplied with full industrial warranty
| Review Average | 0 |
|---|---|
| Review Star Width | 0 |
| Review Count | 0 |
| Review Data Last Updated | 1713837812 |
Milwaukee Power Tools take great pride in the products they offer professional tradesmen allowing Milwaukee to offer a warranty extension out to 36 months from original invoice date. The initial warranty period is 12 months is covered by Power Tools UK, Milwaukee tool warranty extends this out to 36 months overall by using the registration link on the Milwaukee Website www.milwaukeetool.eu . To gain this free of charge warranty extension customers must register the purchase directly with Milwaukee within 30 days of the invoice date.
Milwaukee warranty covers all defects of the product due to defaults in workmanship or material at the invoice date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages.
The warranty is not valid if the product has been misused, used contrary to the instruction manual or being incorrectly connected. This warranty does not apply to:
- any damage to the product that is the result of improper maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any non CE product
- any product which has been attempted to be repaired by an non-qualified professional or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear of spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately. Such exclusions including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.