Milwaukee MILKIT35X Power Tool Kit
MILKIT30X Milwaukee Power Tool Kit powered by 2 x 18v x 5Ah, 2 x 18v x 2Ah REDLITHIUM Batteries, 2 x 18v x 8Ah High Output Batteries, 1 x 12v x 2Ah plus 1 x 12v x 8Ah High Powered Batteries with 2 x 18v Fast Chargers. This Power Tools UK BESPOKE 18v Milwaukee Power Tool Kit brings together 30 machines including M18FPD3 Combi Drill, M18FID3 Impact Driver, M18CCS55 Circular saw, M18FJS Jigsaw, M18FMT Multi Tool, M18TLED Torch, M18FSAG115X Angle Grinder, M18FH SDS-Plus Hammer Drill, M18BOS125 Sander, M18FHZ Hackzall, M18BP Planer and M18RADDAB+G2 Radio, M18FFN Framing Nailer, M18FN16GA Finish Nailer, M18FTR Router, M18FSGC Drywall Screwgun, M18FMS190 Mitre Saw, M18FMTIW2F12 Impact Wrench, M18VC2 Vacuum Cleaner, BBL Blower, M18GG Grease Gun, M18BHG Heat Gun, M18AL LED Area Light, M18BI Inflator, CLL-C Green Cross Line Laser, M18FHIW2F12 Impact Wrench, C18PCG/310C Caulk Gun, M12FPD2 Combi Drill, M12FID2 Impact Driver, M12FCIWF38G3 Impact Wrench, M18BLLT Trimmer, M18F2LM46 Lawn Mower, M18FBLG3 Blower, M18FCHS35 Chainsaw and M18FHET45-0 Hedge Trimmer. This unique suite of powerful industrial power tools from Power Tools UK is packed into 3 x Packout Boxes, 2 x Packout Foam plus 4 x Dynacase Power Tool Boxes and 2 x Toolbags.
Milwaukee M18FPD3 Combi Drill
M18FPD3 Combi Drill is built round a powerful brushless motor uses the compact 175mm design to access tight areas around the site plus the bright LED work light and AUTOSTOP feature plus dedicated auto-stop light protection increases safe controlled working with the M18FPD3.
Other useful features of this class leading power tool include outstanding torque up to 158Nm, 13mm metal chuck giving superior bit retention with fast drilling and driving under load. Individual battery cell monitoring optimises tool run-time ensuring long term durability and the useful battery fuel gauge displays remaining charge throughout the shift. 18v Milwaukee REDLITHIUM Battery Packs provide superior pack construction, electronics and fade-free performance delivering more run-time and more work over the life of the battery
Technical Specification of 18v Milwaukee M18FPD3 Combi Drill
- Brushless POWERSTATE motor technology
- No load speed 1st gear 0 500rpm
- No load speed 2nd gear 0 to 2100rpm
- Maximum percussion rate 0 to 33000bpm
- Maximum torque 158Nm
- Maximum drilling through wood 89mm
- Maximum drilling through steel 16mm
- Maximum drilling through masonry 16mm
- High power efficiency under load
- AUTOSTOP protection for over-rotation in a bind-up
- Superb drilling and driving speeds under load
- 13mm metal chuck giving superior bit retention
- Battery fuel gauge
- Bright LED work light
- Battery cell monitoring for tool optimisation
- All metal reversible belt clip
- Compact 175mm design
- Weight 1.7kgs
- All Milwaukee Power Tools from Power Tools UK come with full industrial warranty
Milwaukee M18FID3 Impact Driver
M18FID3 Impact Driver 3 impact modes including 1 for precision, 2 prevents damage to fasteners and materials, 3 for maximum performance for tough applications and 4 optimises between precision work and maximum performance, automatically adjusting speeds, impacts and torque. Other main features include outstanding maximum torque up to 226Nm, faster driving speed up to 3900rpm and 4400ipm plus DRIVE CONTROL that allows the trade to shift into four different speed and torque settings to maximise application versatility.
This 18v Milwaukee Impact Driver is built round a powerful brushless POWERSTATE motor to tackle heavy applications under load, the REDLINK PLUS intelligence system delivers advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load plus REDLITHIUM battery packs provide superior pack construction, electronics and fade-free performance to deliver more run-time and more work over the life of the battery
Technical Specification of 18v Milwaukee M18FID3 Impact Driver
- Powerful POWERSTATE brushless motor technology
- No load speeds 0 to 1750rpm, 0 to 3000rpm, 0 to 4000rpm, 0 to 4000
- Impact rate 0 to 1400ipm, 0 to 3600ipm, 0 to 4400ipm, 0 to 4400ipm
- Mode 1 for precision work
- Mode 2 prevents damage to fasteners and material
- Mode 3 delivers maximum performance for tough applications
- Mode 4 optimum between precision work and maximum performance, auto adjusts speed, impacts and torque
- Maximum torque 226Nm
- Maximum fastening torque 226Nm
- Maximum bolt diameter M16
- DRIVE CONTROL shifts into 4 different speed and torque settings maximising application versatility
- 1/4" tool reception
- Compact design 115mmoverall length
- REDLINK PLUS intelligence system
- Article number 4933479866
- Belt clip and bit holder
- Weight 1.3kgs
Milwaukee M18CCS55 Circular Saw
M18CCS55 Milwaukee Circular Saw with Milwaukee brushless POWERSTATE motor giving the trade around x3 extended motor life and around x2 more cuts per charge. A 18v Milwaukee Circular Saw uses the REDLINK PLUS intelligence system delivering the most advanced digital protection for tool and battery uniquely enhancing the tool performance under heavy loads.
Features include 50 degree bevel capacity, magnesium upper and lower guards providing durability for impact resistance plus an integrated dust blower that keeps cut lines clear illuminated by a powerful LED work light. A very useful hanging hook allows M18CCS55 Circular Saws to be safety stores plus an easy read integrated battery fuel gauge allows these power tools ready for immediate use at all times.
Technical Specification of 18v Milwaukee M18CCS55 Circular Saw
- Milwaukee brushless POWERSTATE motor
- No load speed 5000rpm
- Blade diameter 165mm
- Maximum cutting depth at 45 degrees 41mm
- Maximum cutting depth at 90 degrees 55mm
- REDLINK PLUS intelligence system
- 50 degree bevel capacity
- Magnesium upper and lower guards maximum impact resistance
- Magnesium shoe reducing weight
- Integrated dust blower
- Integrated battery fuel gauge
- Individual battery cell monitoring
- Optimised tool run times and durability
- LED work light
- Hang hook
- Weight 2.7kgs
Milwaukee M18FJS Jigsaw
M18FJS Milwaukee Jigsaw built round a Milwaukee designed and built brushless POWERSTATE motor for fast cutting, long tool life and up to 32mtr in 19mm OSB using a 5Ah pack plus 5 stage pendulum action for increased cutting performance. Main highlights of this M18FJS Milwaukee Jigsaw includes a keyless bevel facility on the base plate allows for adjustment between 0 - 45 degrees, detachable soft shoe avoids marks and scratches when cutting soft materials plus a Milwaukee patented FIXTEC blade clamp for fast and easy blade changes.
This 18v Milwaukee Jigsaw has a powerful integrated bright LED job light giving the trade superb workspace illumination ideal for working in low light areas around the site and dust blower keeps the cut line free of wood dust. REDLINK PLUS intelligence system delivers an advanced digital overload protection for machine and battery uniquely enhances the tool performance under load
Technical Specification of 18v Milwaukee M18FJS Jigsaw
- Milwaukee designed and built brushless POWERSTATE motor
- Cuts 32mtr x 19mm using a 5Ah REDLITHIUM battery
- No load stroke rate 0 to 3500rpm
- Stroke rate 0 to 3500spm
- Stroke length 25mm
- Maximum cutting capacity through wood 135mm
- Maximum cutting capacity through steel 10mm
- Milwaukee patented FIXTEC blade clamp
- Keyless bevel facility allows adjustment between 0 to 45 degrees
- 5 stage pendulum cutting action increases performance
- Integrated bright LED job light
- Detachable soft shoe protects materials against scratches and marking
- Weight 2.4kgs
Milwaukee M18FMT Multi Tool
M18FMT Milwaukee Multi Tool is built round a POWERSTATE brushless motor plus an aggressive oscillation angle of 2.1 degrees left and right plus 10000 to 20000opm delivering one of the fastest cut speeds in the industry making the M18FMT-0 Milwaukee Multi Tool suitable for many demanding applications with ease, such as rip cuts through hardwoods and nail embedded wood.
Other features include a 10-setting dial with auto-load feature allows the trade to adjust the speed to the application, FIXTEC tool free blade change with universal blade change adaptor included to accept all major competitor blade with a bright integrated 180 degree LED light for maximum visibility in low-light situations around the site.
This 18v Milwaukee Multi Tool integrates MILWAUKEE exclusive technologies, the POWERSTATE brushless motor and REDLINK PLUS intelligence hardware and software delivering outstanding power, run-time and durability on the jobsite, supplied complete with x1 universal fit OPEN-LOK oscillating multi-tool wood blade, x1 multi-tool sanding pad, x1 60grit sand paper, x1 80grit sand paper, x2 120grit sand paper and x1 240grit sand paper
Technical Specification of 18v Milwaukee M18FMT Multi Tool
- POWERSTATE brushless motor
- No load speed 10000rpm to 2000rpm
- Oscillation angle 2.1 degree left and right
- 10 setting dial with auto-load feature
- FIXTEC tool free blade changing
- Universal blade change adaptor for alternative competitor blades
- Integrated 180 degree bright LED job light
- Accessories supplied include:
x1 universal fit OPEN-LOK oscillating multi-tool wood blade
x1 multi-tool sanding pad
x1 60grit sandpaper
x1 80grit sandpaper
x2 12- sandpaper
x1 240grit sandpaper
- REDLINK PLUS intelligence hardware and software
- Weight 1.3kgs
Milwaukee M18TLED LED Torch
M18TLED Milwaukee LED Torch 18v supplies 160 lumen of LED light x2 brighter and whiter than conventional incandescent bulbs, the M18 LED electronics delivers around x2 longer light time from a single charge. Other features include sealed aluminium head designed to take the punishment out on site, impact and weather resistant free plus M18TLED Torches use a 135 degree rotating head that allows the trade to easily and quickly direct light onto the working area
Technical Specification of 18v Milwaukee M18TLED Torch
- Bright and white LED light
- Power 160 lumens
- Sealed aluminium head
- LED electronics increased run-time
- 135 degree rotating head
- Hands free integrated hanging hook
- Flexible battery system works off any M18 Milwaukee battery
Milwaukee M18FSAG115X Angle Grinder
M18FSAG115X Milwaukee Angle Grinder gives the trade superb performance and power, this 115mm cordless angle grinder generates the equivalent of 11A of corded power for faster cutting and grinding out on site. The M18FSAG115X Milwaukee Angle Grinder is built round a tough brushless motor giving the user a superb power band and around 8500rpm increasing run-time and productivity per charge.
Other features of this lightweight Milwaukee Angle Grinder include a kickback protected electronic clutch, overload protection, tool-free disc changing and guard adjustment limits down time of the power tool. This 18v Milwaukee M18 FUEL Angle Grinder is fully compatible with all common grinding and cutting accessories in todays market
Technical Specification of 18v Milwaukee M18FSAG115X Angle Grinder
- 115mm disc diameter
- Tough POWERSTATE brushless motor
- No load speed 8500rpm maximum
- Electronic clutch for kickback protection
- REDLINK PLUS intelligence increase performance, protection and productivity
- Overload protection increased motor life
- Standard M14 spindle
- Quick release guard
- Anti-vibration side handle
- Flange, flange nut and spanner
- Weight 1.6kgs
Milwaukee M18FH SDS-Plus Hammer Drill
M18FH SDS-Plus Hammer Drill delivers fast drilling, hard-hitting performance and maximum control for productivity out on the jobsite. The M18FH has been designed to achieve top performance with only moderate pressure assisted by the superb POWERSTATE Brushless Milwaukee Motor delivering 2.7jls of impact energy, 1330rpm and 4800bpm providing speed and power to tackle the most demanding applications.
This 26mm SDS Plus Rotary Hammer offers the trade 4 separate drilling modes Rotary Hammer, Hammer Only, Rotary Only and Variolock allowing selectable chisel positioning, AUTOSTOP Kickback Control for maximum control and enhanced safety with the tool sensing a bind-up situation when drilling in rebar or hard aggregate and stopping over-rotation, without the need for trigger release and indicated by the AUTOSTOP Indicator LED. The Anti-Vibration System (AVS) minimises vibration for maximum comfort and control when being used over extended periods plus REDLINK PLUS intelligent tool technology ensures maximum rotary drill performance and protects the machine from overload, overheating, and over-discharge. The M18FH SDS-Plus Hammer Drill is fully compatible with all M18 REDLITHIUM batteries and is optimised for use with M18 REDLITHIUM HIGH OUTPUT 6Ah batteries
Technical Specification of Milwaukee M18FH SDS-Plus Hammer Drill
- POWERSTATE brushless motor technology
- No load speed 1330rpm
- Maximum blows per minute 4800bpm
- 2.7jls impact energy
- SDS-Plus quick change chuck
- 26mm drill capacity
- 4 mode selection Rotary Hammer, Hammer Only, Rotary Only and Variolock
- Anti-Vibration System (AVS) for maximum user comfort
- AUTOSTOP Kickback Control senses bind-up and prevents over-rotation
- REDLINK PLUS Intelligence protect from overloads, over-heating and over-discharge
- Integrated LED light for illuminating dark workspaces
- Compatible with 26mm Dedicated Dust Extractor
- Adjustable depth gauge rod for accurate hole depths
- Side handle
- Size l x w x d 320mm x 125mm x 240mm
- Weight 3kgs
Milwaukee M18BOS125 Random Orbit Sander
M18BOS125 Milwaukee Sander is built round a high performance Milwaukee motor that delivers 14000 to 24000 sanding strokes per minute for faster efficient material removal. A variable speed wheel with 6 speed settings allows the correct speed to be set for different types of material, dust extraction box with internal filter keeps dust contained and managed plus the universal hook and loop sanding pad allows easy changing of sanding discs. REDLINK overload protection electronics in sander and battery pack deliver best in class system durability
Technical Specification of 18v Milwaukee M18BOS125 Random Orbit Sander
- Milwaukee high performance motor
- Stock code number 4933464228
- No load speed 12000rpm
- Oscillation rate 14000rpm to 24000rpm
- Oscillation diameter 2.4mm
- Sanding size 125mm
- Variable speed wheel with 6 speed settings
- Dust extraction box with internal filter
- Universal hook and loop sanding pad
- Vacuum adaptor for fitting directly to all Milwaukee dust extractors
- REDLINK overload protection electronics
- Standard equipment dust bag, vacuum adaptor, extension adaptor, two sanding sheets
- Weight 1.3kgs
Milwaukee M18FHZ Hackzall
M18FHZ Milwaukee Hackzall built round a high quality Milwaukee POWERSTATE brushless motor providing increased efficiency, lasting longer and delivering maximum power and control plus a 22mm stroke length for controlled cutting through a no load stroke rate of 3000spm.
Main features of this M18FHZ Milwaukee Hackzall includes a pivoting shoe allowing the trade to optimise cutting positions and built-in high powered LED job light improving visibility in low light cutting applications around the work site plus Milwaukee patented FIXTEC clamp for quick and efficient blade changes. REDLINK PLUS intelligence system delivers an advanced digital overload protection for the machine and battery uniquely enhancing the performance under load
Technical Specification of 18v Milwaukee M18FHZ Hackzall
- Milwaukee POWERSTATE brushless motor
- No load stroke rate 0 to 3000spm
- Stroke length 22mm
- Pivoting shoe allows optimised cutting positions
- Built-in LED job light
- FIXTEC clamp for efficient blade changes
- REDLINK PLUS intelligence system advanced digital overload protection
- Weight 2kgs
Milwaukee M18BP Planer
M18BP Milwaukee Planer with a powerful 4 pole Milwaukee motor capable of delivering 14000rpm for optimum surface finishes, these 18v Planers are capable of fast stock removal using two double edged carbide blades over the total planer width of 82mm. Quick and easy fully adjustable cut depths from 0 to 2mm plus 20 locking positions allowing the trade to accurately set the amount of material to be removed in one pass.
Other features of this M18BP Planer include up to 10.7mm rebate depth, an extended front shoe allowing the machine to be placed on the work piece accurately and quickly plus a kick stand that is located on the base that protects the work piece from accidental damage
Technical Specification of 18v Milwaukee M18BP Planer
- High performance 4 pole motor
- No load speed 14000rpm
- 2 double edged carbide blades
- 82mm planer width
- Adjustable depth 0 to 2mm
- Up to 10.7mm rebate depth
- Left and right chip ejection
- Extended front shoe
- Kick stand protects work piece
- REDLINK overload protection
- Constant speed electronics
- Weight 2.3kgs
Milwaukee M18RADDAB+G2 Jobsite Radio DAB+
M18RADDAB+G2 Milwaukee Jobsite Radio DAB+ tuner plus BLUETOOTH receiver that can pick up a source from around 35mtr away. Powered by 18v Milwaukee Batteries (not supplied) or 240v mains supply this Milwaukee Radio does not charge batteries. This M18 Bluetooth Jobsite Radio features dual 90mm woofers and 2 high range tweeters providing superb playback sound quality. Equipped with AM/FM capabilities and 18 pre-sets, the built-in equalizer settings allow the trade to customize the bass and treble to a preferred sound. Designed and manufactured for the worksite the M18RADDAB+G2 Jobsite Radio provides up to 13 hours of run-time at maximum volume off an 18v x 5Ah REDLITHIUM Battery. The durable design & metal grille withstands demanding jobsite environments and delivers water, dust, and impact resistance.
Technical Specification of 18v Milwaukee M18RADDAB+G2 Jobsite Radio DAB+
- Dual powered 18v Milwaukee batteries or AC mains outlet
- Digital processor delivering high reception and signal clarity
- Digital BLUETOOTH receiver with a 35mtr range
- Dual 9cms woofers provide balanced and clear sound
- Dual high range tweeters
- Tuning range DAB 174.928 - 239.20
- Tuning range FM 87.5 to 108mhz
- Tuning range AM 522-1620khz
- Customisable equaliser
- Shock absorbing end caps
- Metal speaker grills
- Protected USB-C power output
- Size 440mm x 215mm x 215mm
- Weight 4.6kgs
Milwaukee M18FFN Framing Nailer
M18FFN Framing Nailer allows Milwaukee Power Tools to set new standards in the 18v cordless framing nailer sector. By leveraging our nitrogen spring mechanism, POWERSTATE brushless motor, and REDLINK Intelligence, the M18FFN Milwaukee Nailer provides the tradesman with pneumatic performance, convenience and freedom through using cordless power. Delivering the power to sink full round head nails into dense engineered wood, this 18v Framing Nailer tackles even the most demanding framing applications in an efficient and productive manner throughout the working day.
Main features of this superb 18v Milwaukee Framing Nailer include firing 3 nails per second with zero ramp-up time allowing the M18FFN to fire as the trigger is pulled, dry fire lockout, no mark tip included plus sequential and contact firing modes. This 18v cordless Framing Nailer normally powered with superb 5Ah REDLITHIUM Batteries and sealed compressed nitrogen completely eliminating the cost of gas cartridges and maintenance associated with previous technology gas nailers.
The M18 FUEL 30 Degree Milwaukee Framing Nailer delivers the pneumatic performance and durability that professional tradesmen now expect from Milwaukee Power Tools without the hassle of a compressor and hose or gas cartridge
Technical Specification of 18v Milwaukee M18FFN Framing Nailer
- Brushless motor technology
- Collation angle 30 to 34 degrees
- Nail diameter 2.8mm to 3.3mm
- Nail length 50mm to 90mm
- Nail head styles clipped head and full round
- Tool free drive depth adjustment
- Dry fire lock-out
- No-mark tip supplied
- Fires 3 nails per second
- Zero ramp-up time
- Sequential and contact firing modes
- Power to sink full round head nails into dense engineered wood
- No gas cartridge eliminating maintenance
- Rafter hook
- Size l x w x h 360mm x 160mm x 365mm
- Weight 4kgs
Milwaukee M18FN16GA Finish Nailer
M18FN16GA Milwaukee Finish Nailer gives the trade superb power to consistently seat nails sub-flush to the surface in hardwoods. Fires up to 1200 nails per charge on a REDLITHIUM 2Ah battery pack for maximum productivity. Ready to Fire Nail Technology eliminates ramp-up time between each nail discharge, no gas cartridges and no cleaning required, designed to deliver durability and reliability to the most demanding users with very little maintenance.
Main features of this M18FN16GA Milwaukee Finish Nailer include tool-free, quick and easy depth adjustment to assure nails are driven sub-flush, dry-fire lockout stops the tool being fired when there are no nails left in the magazine, smaller nail hole with the exact size of the nail head leaving a neater finish plus a bright LED job light illuminating the work surface for better placement of nails and safe working conditions.
The Finishing Nailer comes with different shaped noses stored on board allowing the trade to get the best finish no matter what the application plus the small work contact bracket allows the operator to fire and sink nails at a more acute angle with quick access and easy cleaning of jams. This M18FN16GA Milwaukee Finish Nailer integrates three MILWAUKEE exclusive technologies, the POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS intelligence hardware and software delivering outstanding power, run-time and durability where it counts out on the jobsite
Technical Specification of 18v Milwaukee M18FN16GA Finish Nailer
- POWERSTATE brushless motor technology
- Nail diameter 1.6mm
- Nail type 32mm to 64mm
- Magazine capacity 110
- Collation angle 20 degrees
- Seats nails sub-flush to the surface in hardwoods
- Ready to Fire Nail Technology
- No gas cartridges
- Exact size of nail head leaving neat finish
- Different shaped noses stored on-board for best finish
- Small work contact bracket for work at an acute angle
- Tool-free quick and easy depth adjustment for sub-flush work
- Dry-fire lockout 1200 nails per 2Ah charge
- Quick and easy clearing of jams
- Bright LED work light
- REDLINK PLUS intelligence hardware and software
- Weight 2.9kgs
Milwaukee M18FTR Router
M18FTR Milwaukee Router FUEL gives the trade all day run-time off a single charge of an M18 x 5Ah battery up to 115mtr of cutting powered through a POWERSTATE brushless motor delivering the power of AC trim routers up to a maximum 31000rpm for powerful, smooth accurate cutting. Main features of this superb cordless M18FTR Milwaukee Router include a variable speed dial allowing users to adjust the speed between 10000 and 31000 rpm to choose the best control for the application at hand, innovative height adjustment system incorporating a 0.4mm micro adjustment, active brake that stops the 18v Router Bit quickly plus plunge base that features 3 stop pins for multiple pass mortising.
Supplied with 2 x dust extraction attachments, 146 mm sub-base-plate that accepts 31.75mm guide bushings, 6mm and 6.35 mm collets, plunge base, 2 x side fences and a powerful dual LED lights to illuminate the work surface. This FUEL M18FTR-0X Milwaukee Router integrates three MILWAUKEE exclusive technologies, a POWERSTATE brushless motor, REDLITHIUM battery packs and REDLINK PLUS intelligence hardware and software delivering outstanding power, run-time and durability out on the work site. As with all Milwaukee M18 power tools this M18FTR Milwaukee Router can be powered through the flexible battery system using by all Milwaukee M18 REDLITHIUM Batteries in the range
Technical Specification of 18v Milwaukee M18FTR Router
- POWERSTATE brushless motor
- Variable speed dial 10000rpm to 31000rpm
- 6 speed settings
- 50mm plunge capacity
- Collet capacity 6/6.35mm
- 146mm sub-base-plate
- Accepts 31.75mm guide bushings
- Plunge base with 3 stop pins
- x2 side fences
- Dual LED job lights
- 115mtr length of cut per 5Ah charge
- Innovative height adjustment system 0.4mm micro adjustment
- Active brake
- Milwaukee article number 4933471603
- REDLINK PLUS intelligence hardware and software
- Milwaukee carry case
- Weight 3.6kgs
Milwaukee M18FSGC Drywall Screwgun
M18FSGC Milwaukee Drywall Screwgun with Autofeed Attachment, Milwaukee designed and built round a brushless POWERSTATE motor gives tradesmen up to x10 longer motor life and around 60% more power. Features of this superb M18FSGC Milwaukee Screwgun includes AUTO-START technology allowing power to be activated when the screwgun is engaged into the material during application, a fine adjustment nose cone sets desired countersink level for single screw applications plus the quick release 1/4" hex chuck allows for easy and quick bit changes.
The intuitive design of the collated attachment allows for easy cleaning of collected drywall dust plus the reinforced collated attachment protects itself against drops while in use. Other market leading features include fuel charge display of remaining charge, bright LED work light, all metal reversible belt clip plus individual battery cell monitoring optimising tool run-time ensuring long term pack durability. The M18FSGC uses the REDLINK PLUS intelligence system delivering advanced digital overload protection for tool and battery uniquely enhancing the performance of the tool under load. REDLITHIUM-ION battery packs provide superior pack construction, electronics and fade free performance delivering more run-time and more work from every charge
Technical Specification of 18v Milwaukee M18FSGC Drywall Screwgun
- POWERSTATE Brushless Motor
- No load speed 0 to 4500rpm
- Maximum stalling torque 13Nm
- AUTO-START technology
- Reinforced collated attachment takes the punishment
- East clean collated attachment
- Remove the collated attachment to use the gun as a stand alone machine
- Fine adjustment nose cone
- Quick release 1/4" hex chuck
- Bright LED work light
- Fuel gauge display
- REDLINK PLUS intelligence system
- Individual battery cell monitoring
- All metal reversible belt clip
- Milwaukee Dynacase kitbox
- Weight 1.7kgs
Milwaukee M18FMS190 Mitre Saw
M18FMS190 Milwaukee Mitre Saw powered by a superb POWERSTATE brushless motor gives the trade around x2 longer motor life and an increase in power of about 25%. Features of this superb 18v Milwaukee Mitre Saw include up to around 300 cuts through 38mm x 89mm soft wood powered by a 5Ah REDLITHIUM Battery enough power for a full shift without recharging, large sliding fences give maximum support to the material being cut increasing stability and accuracy in the cut plus quick release bevel setting allows quick and easy bevel angle setting to left and right.
The M18FMS190 Milwaukee Mitre Saw uses a steel detent plate with pre-set angles allowing repeatable accurate cuts, the LED work light illuminates the work piece and cut line in low light conditions, 190mm blade delivers accurate cut capacities plus an integrated carry handle allows easy transportation on and off the work site and when storing in the back of the van. As with all Milwaukee M18 power tools the M18FMS190-0 Milwaukee Mitre Saw can be powered through the flexible battery system using all Milwaukee M18 REDLITHIUM Batteries in the range
Technical Specification of 18v Milwaukee M18FMS190 Mitre Saw
- Brushless POWERSTATE motor
- No load speed 5000rpm
- 190mm blade diameter x 30mm bore
- Bevel capacity left and right 48 degrees
- Mitre capacity left and right 48 degrees
- Maximum cutting capacity 45 degrees mitre 45 degrees bevel 153mm x 39mm
- Maximum cutting capacity 45 degrees mitre 90 degrees bevel 153mm x 56mm
- Maximum cutting capacity 90 degrees mitre 90 degrees bevel 216mm x 56mm
- Maximum cutting capacity 90 degrees mitre 45 degrees bevel 216mm x 40mm
- Maximum cutting capacity at fence 0 mitre 0 bevel 216mm x 40mm
- Maximum cutting capacity at fence L45 mitre 0 bevel 91mm x 21mm
- Maximum cutting capacity at fence R45 mitre 0 bevel 91mm x 18mm
- Quick release bevel settings
- Large sliding fences for maximum support
- Steel detent plate with pre-set angles for accurate cuts
- REDLINK PLUS advanced digital overload protection
- Bright LED work light
- Integrated carry handle
- Lightweight portable design
- Weight 13kgs
Milwaukee M18FMTIW2F12 Impact Wrench
M18FMTIW2F12 Milwaukee Impact Wrench compact cordless Impact Wrench from the impressive MILWAUKEE range gives the trade industry-leading performance at 881Nm of nut-busting torque and 745Nm of fastening torque plus 152mm overall length ideal for applications in tight spaces around the site. Features of this M18FMTIW2F12 Milwaukee Impact Wrench include 4-Mode DRIVE CONTROL allowing four different speed and torque settings to maximise application versatility, bolt removal control delivers full torque output, then decreases rpm once the bolt is loosened to prevent fastener drops and auto shut-off control applies no more than 47Nm of torque for hand-tight fastening applications preventing over-tightening.
This 18v Impact Wrench uses Tri-LEDs for high definition lighting increasing workspace visibility and safe use, friction ring 1/2" square drive and reversible belt hook allowing hands free work when required. The machine integrates MILWAUKEE exclusive technologies with a Milwaukee POWERSTATE brushless motor and REDLINK PLUS intelligence hardware and software delivering outstanding power, run-time and durability out on the jobsite
Technical Specification of 18v Milwaukee M18FMTIW2F12 Impact Wrench
- Milwaukee POWERSTATE brushless motor
- No load speed 0 to1200rpm, 0 to1950rpm, 0 to 2575rpm and 0 to 1325rpm
- Impact rate 0 to 900ipm, 0 to 2100ipm and 0 to 3100ipm
- Maximum torque 475Nm, 610Nm, 745Nm an 47Nm
- Nut busting torque 881Nm
- Maximum bolt diameter M22
- 1/2" square drive with friction ring
- 152mm overall length
- 4 mode DRIVE CONTROL
- Bolt removal control
- Auto shut-off control
- Tri-LED's high definition lighting
- Reversible belt hook
- REDLINK PLUS intelligence hardware and software
- Weight 1.8kgs
Milwaukee M18VC2 Wet Dry Vacuum Cleaner
M18VC2 Milwaukee Wet Dry Vacuum Cleaner the tough and powerful motor has a maximum air flow rate of 1300ltr/minute/80bar suction power and HEPA rated 99.7% high efficiency wet/dry filter for excellent fine dust collection. Features include DEK 26 compatible allowing easy connection to to power tools, on-board blower for moving debris away from the work area, waterproof switch and 7.5ltr capacity reducing downtime to emptying plus on-board accessory and hose storage for quick access to accessories. M18VC2 Milwaukee Vacuum Cleaner is supplied with a washable filter, hose, crevice tool and utility nozzle and a stackable tool box design for added portability and easier storage
Technical Specification of 18v Milwaukee M18VC2 Vacuum Cleaner
- Powerful 18v motor
- 1300ltr/minute air flow
- 80bar suction power
- HEPA rated 99.7% high efficiency
- Wet and dry filter
- 7.5ltr capacity
- DEK 26 compatible for connection to power tools
- Built-in blower provides 21ltr/second of air flow
- Stackable tool box design
- On-board accessory and hose storage
- Supplied with washable filter, hose, crevice tool and utility tool
- Flexible battery system works with all M18 Milwaukee batteries
- Hose length 0.5mtr
- Weight 5.4kgs
Milwaukee M18BBL Blower
M18BBL Milwaukee Blower clears dirt and debris in tight spaces due tot he compact body design. Features include 3 speed settings with variable speed trigger, lock-on switch, removable nozzle for easy convenient storage plus versatile attachments 230mm nozzle extension and universal inflator/deflator attachment
Technical Specification of 18v M18BBL Milwaukee Blower
- Fan speed 0 to 18700rpm
- 3 speed setting
- Full variable speed control
- Lock-on switch
- Length excluding nozzle 375mm
- Airflow speed 0 to 43km/hr
- Air volume 0 to 2.9m/min
- Compact body
- Removable nozzle
- 230mm nozzle extension
- Universal inflator/deflator
- Weight 1.2kgs
Milwaukee M18GG Grease Gun
M18GG Milwaukee Grease Gun delivers over 562 bar operating pressure plus best in class run time dispensing up to 7 cartridges per charge and 3 way loading bulk, cartridge or suction. Features include 1219mm high pressure flex hose with spring guard, air bleeder valve priming mechanism for quick flow plus integrated hose storage, shoulder strap loop and LED fuel gauge adding user convenience and less down time.
Technical Specification of 18v Milwaukee M18GG Grease Gun
- Powerful 18v industrial motor
- 562 bar maximum operating pressure
- 1219mm high pressure flex hose with spring guard
- Dispenses up to 7 cartridges per charge
- Air bleeder valve priming mechanism for quick flow
- Three way loading bulk, cartridge or suction
- Grease capacity 400ml cartridge or 473ml bulk
- REDLINK overload protection electronics
- Superior balance and handling
- Length 355mm
- Weight 3.9kgs
Milwaukee M18BHG Heat Gun
M18BHG Milwaukee Heat Gun reaches operational temperature in six seconds allowing the trade to quickly complete any application plus a high performance heat coil gives temperatures up to 470c. Features include REDLINK overload protection electronics in the tool (and the battery pack not supplied) deliver best in class system durability, integrated bright LED worklight illuminates the overall work area, durable ladder hook allows work space management and safety and individual battery cell monitoring optimising tool run-time and ensures long term pack durability
Technical Specification of 18v Milwaukee M18BHG Heat Gun
- Temperature range 470c
- Air volume 170ltr/min
- Recommended ambient operating temperature -18c to +52c
- Weight 0.9kgs
Milwaukee M18AL LED Area Light
M18AL Milwaukee LED Area Light with eight high performance LED's provides around 1500 lumens of durable light up to 30% brighter than 250w halogen light. Total flexibility in mounting vertically on a maximum 13mm diameter pipe, threaded rod or rebar allowing hands-free TRUEVIEW high definition lighting operation. Other features include a compact roll cage design for superior durability, convenient built-in handle plus this M18AL Milwaukie Light uses a flexible battery system works with all Milwaukee M18 batteries
Technical Specification of 18v Milwaukee M18AL LED Area Light
- Maximum light output high 1500 lumens, low 780 lumens
- Maximum runtime with M18 x 5Ah battery high 5hrs, low 10hrs
- TRUEVIEW high definition lighting
- Eight high performance LED's
- Compact roll cage
- Convenient built-in handle
- Can be mounted horizontally or vertically
- Maximises hands-free operation
- Flexible battery system works with all Milwaukee M18 batteries
- Weight 2.1kgs
Milwaukee M18BI Inflator
M18BI Milwaukee Inflator delivers fast, accurate, easy inflation with the portability to take the Inflator anywhere. Optimised for cars, cycles, motor bikes and light truck and other medium duty tyres, this M18 Milwaukee Inflator has the capability to complete demanding applications providing ultimate power and efficiency.
Rated to deliver over 150psi, the high efficiency motor and pump tops-off car or light truck tyres in under 60 seconds with TRUEFILL technology delivering highly accurate pressure, protecting from overfill and automatically sensing speed of inflation to deliver precise shut-off at the desired pressure level
Technical Specification of 18v M18BI Inflator
- 0 to 150psi
- Premium components and unmatched durability to handle tyres over 100 PSI
- Rated for 150 PSI Max
- Auto pressure check feature Activates to ensure PSI target is achieved
- Automatic shut-off at selected PSI prevents over inflation
- Optimised for passenger, light truck and medium duty tyres
- Anti-vibration feet
- 4 PSI memory pre-sets
- 3 units of measurement: PSI, KPA & BAR
- On-board hose and nozzle storage
- Presta and Schrader chucks
- Size l x w x h 350mm x 165mm x 200mm
- Weight 3.2kgs
Milwaukee CLL-C Green Cross Line Laser
CLL-C Green Cross Line Laser powered by 4 x AA Alkaline batteries, provides an all-in-one functionality with horizontal levelling and vertical alignment using high intensity green beams providing a working range of 30mtr and up to 50mtr with a detector (not supplied). The CLL-C Cross Line Laser uses a 3 mode pendulum system, Manual Mode for use at any angle, Self-Levelling Mode that indicates out-of-level condition with a 4 degree self-levelling range and Pendulum Lock Mode to protect components during transportation to and from site or between measurements.
Other features include an integrated magnetic bracket with rear mounted amplified rare earth magnets, 1/4″ tripod thread and hang hole allowing the Milwaukee Laser to be attached to steel studding, wooden studding and a tripod, the bracket also provides the laser 360 degree rotation. Designed and manufactured with a tough over-moulded construction the laser has a IP54 rating, water and debris resistant withstanding up to 1mtr drops out on site
Technical Specification Milwaukee CLL-C Green Cross Line Laser
- High intensity green cross line laser
- 1x vertical green laser line, 1x horizontal green laser line
- Visible working range 30mtr
- Detector working range 50mtr (detectors LLD50 or LRD100 not supplied)
- Self levelling range 4 degrees
- Self levelling time 3 seconds
- Accuracy 0.3mm/mtr
- 3 mode pendulum
Manual mode for use at any angle
Self levelling mode indicates out-of-level condition
Pendulum lock mode protecting components during transit
- Integrated magnetic brackets
- Rear mounted amplified rare earth magnets
- 1/4" tripod thread
- Hanging hole for attaching to studding
- Bracket allows 360 degree laser rotation
- Tough overmould protection IP54 rating
- Water and debris resistant withstanding 1mtr drops
- 4 x AA alkaline batteries provides over 8hrs runtime power
- Milwaukee kitbox
- Weight 0.7kgs
Milwaukee M18FHIW2F12 Impact Wrench
M18FHIW2F12 Milwaukee Impact Wrench, this superb compact FUEL 18v Milwaukee Impact Wrench includes as standard high torque rating delivering 1491Nm fastening torque and 2034Nm of nut-busting torque, 2000rpm of no load speed to perform tasks 35% faster than with the previous generation impact wrenches.
4-Mode DRIVE CONTROL allows the trade to shift into four different speed and torque settings maximising application versatility, Mode 4 bolt removal provides maximum nut-busting torque then shifts to 750rpm for outstanding control when removing the fastener. Tri-LEDs deliver high-definition lighting out on the worksite increasing workspace visibility and safe working conditions plus the battery isolation system provides a secure battery connection and controls vibration being transmitted through to the power pack.
The DNA of the Milwaukee FUEL platform redefines the balance of cordless technologies, Milwaukee POWERSTATE brushless motors, REDLITHIUM battery packs and REDLINK PLUS electronic intelligence delivers outstanding power, run-time and durability
Technical Specification of Milwaukee M18FHIW2F12 Impact Wrench
- High powered brushless motor technology
- M18 FUEL Milwaukee Power Tools
- 4 Mode drive control
- Mode 4 bolt removal for maximum nut-busting torque reduces to 750rpm for removal control
- No load speeds 0 to 700rpm, 0 to 1300rpm, 0 to 2000rpm and 0 to 2000rpm
- Impact rates 0 to 1300ipm, 0 to 2200ipm, 0 to 2400ipm and 0 to 2400ipm
- Maximum torque 881Nm, 1220Nm, 1491Nm and 68Nm
- Nut busting torque 2034Nm
- Maximum bolt diameter M36
- 1/2" square tool reception
- Durable and robust gearcase
- High definition light from tri-LEDs
- REDLINK PLUS electronic intelligence delivering outstanding power, run-times and durability
- Weight 3.2kgs
Milwaukee C18PCG/310C Caulk Gun
C18PCG/310C Milwaukee Caulk Gun gives the trade up to 4500N of force around 40% higher than previous Milwaukee caulk guns plus optimised performance with all adhesives and cool temperatures and REDLINK overload protection electronics in tool and the 18v battery pack delivering superb durability out on site. Other features of the C18PCG/310C-0 Milwaukee Caulk Gun include an anti-drip feature that prevents unwanted dripping when trigger is released, dial control with 6 speed settings allows for maximum bead control, on board fuel gauge and bright LED light, large robust plunger design ensuring constant flow reduces blow back and expelling all sealant from the cartridge.
Technical Specification of 18v Milwaukee C18PCG/310C Caulk Gun
- Maximum pushing force 4500N
- 6 speed settings
- 310ml canister cartridge holder
- Anti-drip feature
- Large robust plunger
- Constant flow, reduced blow back and expels all sealant
- On board fuel gauge
- Bright LED joblight
- Individual battery cell monitoring optimises tool runtime
- REDLINK overload protection electronics
- Weight 1.7kgs
Milwaukee M12FPD2 Combi Drill
M12FPD2 Milwaukee Combi Drill features include 45Nm of torque giving the trade superior power to size ratio, mechanical clutch with 13 torque settings plus 1 for locked clutch drilling and 1 for locked clutch hammer plus an on board fuel gauge, metal belt clip. The bright LED work light allows safe working conditions in low light areas around the site, 13mm heavy duty metal chuck for quick bit changes and bit retention and an extremely compact design of 152mm length for access into tight spaces.
The DNA of the Milwaukee our FUEL platform redefines the balance of cordless technologies. MILWAUKEE POWERSTATE brushless motors, REDLITHIUM battery packs and REDLINK PLUS electronic intelligence delivers outstanding power, run-time and durability
Technical Specification of Milwaukee M12FPD2 Combi Drill
- POWERSTATE brushless motor technology
- No load speed gear 1 0 to 450rpm
- No load speed gear 2 0 to 1550rpm
- Maximum torque 45Nm
- Mechanical clutch with 13 torque settings
- 1 setting for locked clutch drilling plus 1 setting for locked clutch hammer
- Maximum percussion rate 0 to 22500bpm
- Maximum drilling through masonry 13mm
- Maximum drilling through wood 35mm
- Maximum drilling through steel 13mm
- Maximum wood screw size 8mm
- 13mm metal keyless chuck
- Bright LED work light
- On-board fuel gauge
- REDLINK PLUS electronic intelligence
- 152mm head length gives access into tight space
- Metal belt clip
- Weight 1.1kgs
Milwaukee M12FID2 Impact Driver
M12FID2 Milwaukee Impact Driver, the compact design of this 12v Impact Wrench and length of only 127mm makes it the ideal machine for working in confined spaces, assisted by tri-LED's delivering high definition light on to the workpiece. The M12FID2-0 gives the tradesman outstanding power to size ratio with 170Nm of torque and superb driving speeds up to 3600rpm and 4000ipm. Other features include 4-Mode DRIVE CONTROL allowing the trade to shift to three different speed and torque settings, as well as a self-tapping mode to maximise application versatility plus the 1/4 Hex Chuck allows quick and easy bit changes.
The DNA of the Milwaukee FUEL platform redefines the balance of cordless technologies, MILWAUKEE POWERSTATE brushless motors, REDLITHIUM battery packs and REDLINK PLUS electronic intelligence delivers outstanding power, run-time and durability
Technical Specification of 12v Milwaukee M12FID2 Impact Driver
- Powerful POWERSTATE brushless motor
- No load speed gear 1 0 to 1700rpm
- No load speed gear 2 0 to 2900rpm
- No load speed gear 3 0 to 3600rpm
- No load speed gear 4 0 to 3600rpm
- Maximum torque 170Nm
- Impact rate 0 to 4000ipm
- 4 mode DRIVE CONTROL 3 different speeds and torque settings plus self tapping mode
- Tri-LED's high definition lights
- 127mm compact length
- 1/4" hex drive
- REDLINK PLUS electronic intelligence
- Article number 4933479876
- Weight 0.9kgs
Milwaukee M12FCIWF38G3 Impact Wrench
M12FCIWF38G3 Milwaukee Impact Wrench gives the trade best in class power 542Nm of fastening and 745Nm of nut-busting torque to tackle most common applications. Some of the main features of this machine include 4-Mode DRIVE CONTROL allows shifting into four different speed and torque settings to maximise application versatility, trigger mode selection for easy one hand selection of speed settings plus 3000rpm for exceptional application speeds.
M12FCIWF38G3-0 impact wrenches weight in at 1.2kg, and have a head length of just over 120mm allowing for better access to tight spaces assisted by the tri-LED work lights for shadowless work area illumination. The DNA of Milwaukee FUEL platform redefines the balance of cordless technologies. MILWAUKEE POWERSTATE brushless motors, REDLITHIUM battery packs and REDLINK PLUS electronic intelligence deliver outstanding power, run-times and durability
Technical Specification of Milwaukee M12FCIWF38G3 Impact Wrench
- 12v FUEL Milwaukee power tool
- POWERSTATE brushless motor technology
- 4 MODE DRIVE control
- Trigger mode selection
- No load speeds
0 to 930rpm
0 to 2100rpm
0 to 3000
0 to 1300rpm
- Impact rates
0 to 1500imp
0 to 3000ipm
0 to 3300ipm
- Maximum torque 642Nm
- Nut busting torque 745Nm
- Maximum bolt diameter M16
- Friction ring
- 3/8 square drive
- 120mm long
- Tri-LED worklights
- REDLINK PLUS electronic intelligence
- Weight 1.2kgs
Milwaukee M18BLLT Line Trimmer
M18BLLT-0 Milwaukee Line Trimmer has the power to clear thick brush and reaches full throttle in under 1 second, up to 4600rpm in first mode and 6200rpm in second mode. The M18BLLT-0 Line Trimmer uses an comfortable 2-speed variable trigger allowing the operator to choose between higher performance or extended run-time, the machine has an adjustable cutting swath of 350mm to 400mm, easy load trimmer head and adjustable auxiliary handle for optimum user comfort and control. The brushless motor, REDLITHIUM battery pack (not supplied) and REDLINK electronic deliver power, run-time and durability with up to 1 hour of runtime from an M18 HIGH OUTPUT 8Ah battery pack
Technical Specification of 18v Milwaukee M18BLLT Line Trimmer
- Brushless motor technology
- 2 speed modes 4600rpm and 6200rpm
- Variable speed trigger control
- 2 speed trigger allows choice between higher performance or extended run-time
- Cutting path width 400mm
- 350mm - 400mm adjustable cutting swath
- Cutting line diameter 2.4mm
- Easy load trimmer head
- Around 1hr run-time from an M18 x 8Ah HIGH OUTPUT battery
- Adjustable auxiliary handle for optimum comfort and control
- REDLINK electronics delivering power, run-time and durability
- x1 steel key
- x1 T30 torx key
- x1 trimmer line
- Weight 5.3kgs with battery
Milwaukee M18F2LM46 Lawn Mower
M18F2LM46 Milwaukee Self Propelled Lawn Mower cuts areas up to 1600mtr2 off a single charge of the two M18 HIGH OUTPUT 8Ah battery packs (not supplied) in combination with the self-propelled mode. The high quality 460mm steel deck plus innovative blade design paired with M18 FUEL technology and Active Speed Management Paddle delivers ultimate control delivering superb cuts whatever the application.
Features of this outstanding machine include a 3-in-1 Grass Management System to mulch, bag, or rear side discharge, High Lift Mode to toggle between continuous outstanding peak power for best cut quality and automatic blade speed adjustment to the required power for more efficiency plus a fully adjustable Self-Propelled Mechanism with 5 Speed Settings delivering up to 6.5km/h cutting speed. The M18F2LM46 Milwaukee Lawn Mower uses the 7 position single point Cutting Height Adjustment from 25mm to 100mm to tackle a range of grass types without compromise to the cut quality plus the built-in front headlight delivers increased awareness and precision cuts in low light conditions.
The HIGH OUTPUT system of Milwaukee Power Tools elevates M18 FUEL Technology to a new level, delivering extended performance and run- time. These suite of machines has been designed to maximise the partnership with Milwaukee HIGH OUTPUT and Milwaukee FORGE batteries.
Technical Specification of Milwaukee M18F2LM46 Lawn Mower
- High output M18 FUEL technology
- Self-propelled lawn mower runs off x2 18v batteries for outstanding power and performance (batteries not supplied)
- Cuts areas up to 1600mtr2 off a single charge of two 8Ah High Output REDLITHIUM batteries (batteries not supplied)
- 460mm steel deck
- Blade speed 3800rpm
- 5 speed settings delivers up to 6.5kn/hr cutting speed
- High lift mode toggle between continuous outstanding peak power and auto blade speed adjustment
- Active speed management paddle allows ultimate control
- 7 position single point cutting height adjustment 25mm to 100mm
- 3 in 1 grass management system mulch, bag or rear side discharge
- Front headlamp allows safe operation late in the shift
- Folding handles and upright storage for safe and easy transportation
- Supplied with mulch plug, 60ltr collection bag and rear side discharge chute
- Front wheels 19cms diameter x rear wheels 24cms diameter
- SKU number 4933492010
- Weight 33kgs
Milwaukee M18FBLG3 Blower
M18FBLG3 Milwaukee Blower M18 FUEL gives up to 14.2 m³/min of air volume at 193 km/hr to clear debris plus consistent blowing force of 12.2N throughout the entire battery discharge. Other features include full throttle in under 1 second plus an ambidextrous variable speed lock allows the trade to lock on to any speed for precise applications and optimum run-time. The machine has fully compatible interchangeable nozzle attachments to optimise the blowing pattern for various applications.
The DNA of Milwaukee FUEL platform redefines the balance of cordless technologies. Milwaukee POWERSTATE brushless motor, High Output REDLITHIUM battery packs and REDLINK PLUS electronic intelligence delivers outstanding power, run-time and durability
Technical Specification of Milwaukee M18FBLG3 Blower
- Milwaukee POWERSTATE brushless motor technology
- Up to 14.2mtr3/minute air volume at 193kms/hr
- 12.2N consistent blowing force
- Full throttle in 1 second
- Ambidextrous variable speed lock
- Lock on any speed for optimum run-time
- Compatible with interchangeable nozzle attachments
- Optimised blowing patterns for various application
- Fuel platform redefines cordless technology
- High output REDLITHIUM batteries
- REDLINK Plus electronic intelligence delivers outstanding power, run-time and durability
- SKU number 4933493301
Milwaukee M18FCHS35 Chainsaw
M18FCHS35 Milwaukee Chainsaw delivers the power to outperform on the most demanding applications against petrol chainsaws, maintains speed in tough applications without bogging down. This 18v Milwaukee Chainsaw cuts up to 150 pieces of 100mm x 100mm pine on a full charge of an M18 HIGH OUTPUT 12Ah battery pack plus 80cc of oil, chain tool and bar cover. Other features of this FUEL M18FCHS35 Chainsaw is manufactured with high strength all metal gearing that delivers best in class torque, a variable speed trigger allows the trade to have full control over the power curve, giving instantaneous throttle response to reach full speed in under one second.
The no-spill oil reservoir has an easy to access tank and clear viewing window plus all metal bucking spikes allows increased leverage when cutting. The HIGH OUTPUT system of Milwaukee Power Tools elevates M18 FUEL technologies to a new level and delivers extended performance and run-time, designed to maximise the partnership with HIGH OUTPUT Milwaukee batteries
Technical Specification of Milwaukee M18FCHS35 Chainsaw
- 18v M18 FUEL power tool
- Chain bar length 350mm
- Chain speed 12.4mtr/second
- Maintains speed through tough applications
- No bogging down
- Cuts around 150 pieces of 100mm x 100mm pine from a single charge
- High strength all metal gearbox
- Variable speed trigger for full control over the power curve
- Instantaneous throttle response
- All metal bucking spikes increases leverage
- No spill oil reservoir with easy access
- 80cc of oil, chain tool and bar cover
- Weight 5.7kgs
Milwaukee M18FHET45-0 Hedge Trimmer
M18FHET45 Milwaukee Hedge Trimmer gives professional maintenance and landscapers superb cutting performance with the power to cut up to 20mm branches and using the 600mm blade to trim/cut maximum material in a single pass. M18FHET45 Hedge Cutters fitted with double sharpened blades assist with clean cuts and removal of thicker material, Milwaukee state outstanding performance with up to 2 hours of run-time from a single 18v x 8Ah HIGH OUTPUT REDLITHIUM Battery Pack
Technical Specification of Milwaukee M18FHET45 Hedge Trimmer
- Milwaukee POWERSTATE brushless motor technology
- Blade length 450mm
- Double sharpened blade giving clean cuts
- Power to cut up to 20mm branches
- Up to 120 minutes of run-time from a full charge of 1 x 18v x 8Ah HIGH OUTPUT Battery (not supplied with this machine)
- REDLINK PLUS intelligence system advanced digital overload protection
- Blade cover
- Weight 4kgs
